SOFTPAQ NUMBER: SP2406 PART NUMBER: 275709-003 FILE NAME: N/A TITLE: ProSignia and SystemPro/XL ROMPaq VERSION: 3.12 Rev A LANGUAGE: English CATEGORY: ROMPaq PRODUCTS AFFECTED: Compaq Systempro/XL and ProSignia Servers NOTE: For ProLiant 1000, 1500, 2000, 4000, 4500, and 5000 Servers, use SoftPaq SP2407. For ProLiant 800 and 2500 Servers, use SoftPaq SP2408. OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 10 April 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: SP2403 DESCRIPTION: Creates the Systems ROMPaq Firmware Upgrade Diskette for Compaq SystemPro/XL and Compaq ProSignia Servers. This release provides an updated system ROM image for ProSignia 200 and ProSignia 300/500 servers. For SystemPro/XL servers, this release provides a System ROM image that remains the same as on the superseded SoftPaq. Enhancements ------------ ROM E15 - ProSignia 300/500 (02/24/97): - Adds S.M.A.R.T. drive failure prediction support Fixes ----- ROM P01 - ProSignia 200 (02/24/97): - Changes Secondary Disk Controller error from 1792 to 1782 - Skips multi-bit error check if ECC is disabled in order to avoid reporting erroneous memory errors - Frees IRQ 15 if secondary IDE is disabled, so that it can be used by the system. HOW TO USE: 1. Obtain a formatted 1.44 MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP2406.EXE. 3. From that drive and directory, execute the SoftPaq file: SP2406 [ENTER] You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to create the diskette. 4. After the diskette is created, you may delete the downloaded file SP2406.EXE if you wish. 5. Refer to the README file on the diskette for specific upgrade instructions and additional help. Copyright 1997, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies