TITLE: ROMPaq for Evo D500, D300, and W4000 Models (686Y2 ROM)

VERSION: 2.11 Rev A
DESCRIPTION:
This SoftPaq creates a ROMPaq firmware diskette that can be used to locally 
restore or upgrade the System ROM in the Compaq Models with a 686Y2 Family ROM.  
A backup of the current System ROM will be copied onto the ROMPaq diskette 
during the flash process. 

The ROM Family and ROM date can be determined by running the Setup Utility 
by pressing F10 on the target computer during system power on of the computer, 
and viewing File/System Information.  This information can be saved into a text 
file by selecting File/Save to Diskette. 

PURPOSE: Routine Release
SOFTPAQ NUMBER: SP20374
SUPERSEDES: SP19600
EFFECTIVE DATE: March 13, 2002
CATEGORY: ROMPaqs
SSM SUPPORTED: No

PRODUCT TYPE(S): Desktops, Workstations
 
PRODUCT MODEL(S): 
    Evo D500 Desktop:  All Models 
    Evo D500 CMT: All Models
    Evo D500 SFF: All Celeron and Pentium 4 Models

    Evo D300 Desktop:  All Models 
    Evo D300 CMT: All Models
    Evo D300 SFF: All Celeron and Pentium 4 Models
	
    Evo Workstation W4000 CMT: All Models

    Evo Workstation W4000 SFF: All Models

OPERATING SYSTEM(S): 
    Microsoft Windows XP Professional
    Microsoft Windows 2000
    Microsoft Windows NT 4.0
    Microsoft Windows 98
 
LANGUAGE(S): Global

ENHANCEMENTS:
- Adds BIOS DMA support for IDE hard drive services.  This reduces the time 
  required to boot, resume from hibernation, and perform drive imaging under DOS.
- BIOS enables Power Managment Event (PME) for IBM TR PCI Management NICs.

FIXES:
- Works around a possible programming issue with the STMicro Fimware Hub.
- Corrects and issue sometimes seen where IDE Defaults translation mode was 
  seen incorrectly after doing a restore from CPQSETUP.TXT on diskette.
- Resets the IDE Default settings when upgrading an existing ROM 
  (v2.09 or earlier) to a ROM that supports the programmable IDE Defaults.

 
PREREQUISITES: None
 
HOW TO USE: 

1.  Obtain a formatted 1.44-MB diskette and place it in your A: drive.

2.  Download the SoftPaq to a directory on your hard drive.  The file that is
downloaded is an executable with a filename based on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file and follow the
on-screen instructions to build the ROMPaq diskette.

4.  Place the newly created diskette in the A: drive of the computer to be
upgraded or restored and cycle system power to boot from the ROMPaq diskette.

5.  Follow the on-screen instructions to select the Compaq System ROM and flash
the firmware.

WARNING:  DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE
UPGRADE PROCESS!!!
 

(c) 2002 Compaq Information Technologies Group, L.P.

Compaq and the Compaq logo are trademarks of Compaq Information Technologies Group, L.P. 
in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respective companies.