TITLE: ROM Image for Evo D500, D300, and W4000 (686Y2 ROM) Remote ROM Flash

VERSION: 2.10 Rev A
DESCRIPTION:
This SoftPaq creates files that contain a binary image for the System ROM for
the Compaq Models with a 686Y2 Family ROM.

This SoftPaq is used to flash the System ROM on target PCs on a network, and it
requires Compaq System Software Manager (SSM) or Remote Management Setup.

The ROM Family and ROM date can be determined by running the Setup Utility by
pressing F10 on the target computer during system power on of the computer,
and viewing File/System Information.  This information can be saved into a text 
file by selecting File/Save to Diskette.

If you use Compaq System Software Manager (SSM) to deploy SoftPaqs within your
organization, you must upgrade to SSM version 1.50 (SP17447), which supports
all new and existing SoftPaq formats.  For information on SSM, check
"http://www.compaq.com/im/change/ssmwp.html.

PURPOSE: Routine Release
SOFTPAQ NUMBER: SP20361
SUPERSEDES: SP19587
EFFECTIVE DATE: February 5, 2002
CATEGORY: ROMPaqs
SSM SUPPORTED: Yes

PRODUCT TYPE(S): Desktops, Workstations
 
PRODUCT MODEL(S): 
    Evo D500 Desktop:  All Models 
    Evo D500 CMT: All Models
    Evo D500 SFF: All Celeron and Pentium 4 Models

    Evo D300 Desktop:  All Models 
    Evo D300 CMT: All Models
    Evo D300 SFF: All Celeron and Pentium 4 Models
	
    Evo Workstation W4000 CMT: All Models
    Evo Workstation W4000 SFF: All Models

OPERATING SYSTEM(S): 
    Microsoft Windows NT 4.00
    Microsoft Windows 2000
    Microsoft Windows XP 32-bit Professional
    Microsoft Windows 98
 
LANGUAGE(S): Global

ENHANCEMENTS:
 - Enhances Disk-on-Key support to improve portability between platforms.
 - Ensures the Master Password can be set or changed, even when Drivelock 
   is currently disabled.
 - Ensures the diskette controller is enabled when entering Bootblock 
   Emergency Recovery mode to permit booting from a ROMPaq diskette.
 - Maximizes the use of DCH memory space for option ROM.

FIXES:
 - Corrects the memory and I/O conflicts introduced under F10 Setup when 
   disabling/enabling/changing IRQ for PCI devices or when swapping the 
   primary VGA if multiple VGA adapters are in the system.
 - Allows the system to boot even if the video option ROM's checksum is 
   not valid.  This is for a video adapter with an option ROM that does 
   not update its own checksum after execution.

PREREQUISITES: Compaq System Software Manager (SSM) or Remote Management Setup
 
HOW TO USE: 

1.  Download the SoftPaq to a directory on your hard drive.  The file
downloaded is a self-extracting executable with a filename based on the
SoftPaq Number above.

2.  Refer to the remote utility documentation for instructions on creating a
Remote ROM Flash job to flash the System ROM on target PCs on the network.

WARNING:  DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE
UPGRADE PROCESS!!!
 

(c) 2002 Compaq Information Technologies Group, L.P.

Compaq and the Compaq logo are trademarks of Compaq Information Technologies Group, L.P. 
in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respective companies.