TITLE: Thin Client T1010 (8/32) Rapport Package for WinCE Firmware (Primer Only)

VERSION: 3.5.1 Rev B441.22
DESCRIPTION: This contains the Rapport package to add WinCE firmware (Primer only)
to a Compaq Thin Client T1010.

PURPOSE: Routine Release
SOFTPAQ NUMBER: SP20091
SUPERSEDES: None
EFFECTIVE DATE: February 28, 2002
CATEGORY: Network
SSM SUPPORTED: No

PRODUCT TYPE(S)
Thin Clients
 
PRODUCT MODEL(S): 
Compaq Thin Client T1010

OPERATING SYSTEM(S): 
Microsoft Windows NT 4.00 Server with Service Pack 5 or higher
Microsoft Windows NT 4.00 Terminal Server with Service Pack 5 or higher
Microsoft Windows NT 4.00 Workstation with Service Pack 5 or higher
Microsoft Windows 2000 Server with Service Pack 1 or higher
Microsoft Windows 2000 Advanced Server with Service Pack 1 or higher
Microsoft Windows 2000 Professional with Service Pack 1 or higher
 
LANGUAGE(S): 
US English

FIXES: 
 - Terminal locked up when powered off at the Single Button Connect screen. 
 - Best DDC lockup if monitor cable is not attached or monitor is not DDC 
   compatible. 
 - Under Terminal Properties\System tab under Flash Memory, "Devive 2" 
   should be spelled as "Device 2".
 - In Windows 2000, bottom half of mouse pointer disappeared after 
   reaching top of screen display. 
 - Winterm could lock up on Splash Screen if some special monitor was 
   attached. (i.e WY-1570DES). 
 - Checksum error when using Compaq Thin Client Manager to upgrade 
   firmware. 
 - Turning off power via power switch did not release DHCP address. 
 - Splash screen display flickered on boot-up. 
 - Unit locked up on splashscreen with LG771G monitor. 
 - Compaq mouse cursor disappeared when hot-swapping. 
 - ESC did not allow user to exit to  "Terminal Login", only Alt-F4 
   should exit. 
 - Video polarity issue. 
 - Failed to properly write correct checksum to EEPROM. 
 
PREREQUISITES: 
Rapport 3.01 or later must be installed on your server.
 
HOW TO USE: 

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable
with a filename based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen
instructions.

3. Read the *.RSP file and follow the instructions for each
script before running them from Rapport, in order for
them to work correctly.
 

(c) 2002 Compaq Information Technologies Group, L.P.

Compaq and the Compaq logo are trademarks of Compaq Information Technologies Group, L.P. 
in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respective companies.