TITLE: Armada M300 Remote System BIOS (ROM) Upgrade (686R ROM)

VERSION: 2001.11.28 Rev. A
DESCRIPTION:
This Softpaq creates .CAB files that contain a binary image for
the System ROM for Armada M300 Series notebooks with a 686R Family ROM.
The ROM Family and ROM date can be determined by running F10 Setup.
To flash (upgrade) the ROM image remotely over a network with these .CAB files,
you must use Remote Management Software such as Compaq System Software
Manager (SSM).

PURPOSE: Routine Release
SOFTPAQ NUMBER: SP20084
SUPERSEDES: SP19376
EFFECTIVE DATE: December 27, 2001
CATEGORY: ROMPaqs and System Software
SSM SUPPORTED: Yes

PRODUCT TYPE(S)
Notebooks
 
PRODUCT MODEL(S): 
Compaq Armada M300 Series

OPERATING SYSTEM(S): 
OS Independent
 
LANGUAGE(S): 
US English
 
ENHANCEMENTS: 
 - Enhances the battery calibration feature.
 
FIXES: 
 - Fixes an issue with the Compaq Internet keyboard.
 - Fixes an issue where the Trackpoint cursor freezes in Windows 2000 when the 
   "Press to Select" option is selected in the Easypoint software.
 - Fixes an issue where the embedded keypad is active when a USB keyboard or
   keypad is attached.

PREREQUISITES: 
Compaq System Software Manager (available in Softpaq SP17447)
 
HOW TO USE: 

1. Download the SoftPaq to a temporary, empty directory on your hard drive. The
file downloaded is a self-extracting executable with a filename based on the
SoftPaq Number above.

2. The BIOS/ROM image file must be used with Remote Management Software in
order to actually flash (upgrade) the ROM image on one of the affected Armada
notebooks.

3. When used with SSM, copy the SoftPaq to the file store.

4. When used with WINFLASH, run the SoftPaq to get the .cab file.

IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS
PROCEDURE!
 
 
Copyright (C)2001, Compaq Computer Corporation.  All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies