SOFTPAQ NUMBER: SP19837 FILE NAME: SP19837.EXE TITLE: Tape Options ROMPaq VERSION: 2.00 Rev A LANGUAGE: English CATEGORY: ROMPaqs DIVISION: Systems PRODUCTS AFFECTED: Systems Updated: - ProSignia, ProSignia VS, ProSignia 200/300/500, Prosignia Server 720/740 - Proliant 800/850R/1000/1200/1500/1600/1850R/2000/2500/3000/4000/4500/5000/5500/ 6000/6500/7000/8000/8500/DL380/ML350/ML370/ML530, Rack-Mountable Proliant Servers or Systempro, Systempro/e, Systempro/LT, Systempro/XL Options Affected: COMPAQ TSL9000 COMPAQ AIT 35 LVD COMPAQ DDS-4 SDT1000 COMPAQ AIT 100 COMPAQ AIT 35, COMPAQ TSL1000 COMPAQ SDLT COMPAQ AIT2 50 Please stop all backup applications before updating a tape drive or tape library. Depending on your software application, you may need to unmount (unreserve) any tape cartridges in the library. See your computer operating system documentation or software application documentation for instructions on how to unmount tape cartridges. Due to space restraints inherent to diskettes, it is necessary to first boot diskette #1, then insert the desired diskette and proceed with the "Refresh/Change Disk" option. * NOTE 1: DLT and SDLT1 tape drives inside libraries may not come ready and/or report the correct firmware version when the drive firmware is upgraded. Therefore, after a firmware upgrade, you should power-cycle the tape library (or use the reboot function on the front panel). * NOTE 2: Select the correct diskette as indicated by the SCSI adapter used by the device(s). OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: Jun, 2002 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 5.X SUPERSEDES: SP 19672 Tape Option ROMPAq v1.90 Rev. A, for drives which are common to both. DESCRIPTION: The Tape Options ROMPaq diskettes allow a user to upgrade the ROM Firmware images on Compaq tape product Options. The Tape Options ROMPaq consists of five (7) diskettes: Disk 1 - This is the boot disk for this release. Disk 2 - COMPAQ TSL9000 Disk 3 - COMPAQ AIT 35 LVD, COMPAQ DDS-4 SDT1000 Disk 4 - COMPAQ AIT 100 Disk 5 - COMPAQ AIT 35, COMPAQ TSL1000 Disk 6 - COMPAQ SDLT Disk 7 - COMPAQ AIT2 50 Firmware revisions in this release: AIT2 50 1.34 AIT 35 LVD 3.0B AIT 100 7.05 AIT 35 4.19 TSL1000 5.09 DDS-4 SDT1000 1.16 TSL9000 2.16 SDLT V45 CPQ-2 HOW TO USE: 1. Obtain up to 7 1.44-MB diskettes. You will need at least 2. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert a formatted diskette in a drive to create the diskette. 4. After all diskettes have been created, you may delete the SoftPaq file downloaded in step 2. 5. Tape Options ROMPaq 2.00 diskette 1 is the only self-booting diskette. Place ROMPaq diskette 1 into your drive A: diskette drive and power cycle your system to begin updating the appropriate components. 6. When the "Refresh/Change Disk" option appears, insert the proper diskette for the intended controller/drive combination, then click on "Refresh/Change Disk" and continue following the menus. Copyright 2002, HP Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.