SOFTPAQ NUMBER: SP19831 PART NUMBER: 276090-699 FILE NAME: N/A TITLE: Compaq System Erase Utility VERSION: 1.69 Rev A LANGUAGE: Japanese CATEGORY: Software Solutions DIVISIONS: Systems PRODUCTS AFFECTED: ProSignia, ProSignia VS, ProSignia 200 Family, ProSignia 300, ProSignia 500, ProSignia 720, ProSignia 740, Systempro, Systempro/E, Systempro/LT, Systempro/XL, Deskpro/L Family, Deskpro/M Family, Deskpro/XL Family, Portable 486, ProLiant 800, ProLiant 850R, ProLiant 1000, ProLiant 1200, ProLiant 1500, ProLiant 1600, ProLiant 1850R, ProLiant 2500, ProLiant 3000, ProLiant 2000/4000, ProLiant 4500, ProLiant 5000, ProLiant 5500, ProLiant 6000, ProLiant 6400R, ProLiant 6500, ProLiant 7000, ProLiant 8000, ProLiant 8500, ProLiant CL1850, ProLiant ML370, ProLiant ML530, ProLiant DL380, ProLiant ML570, ProLiant DL580, ProLiant CL380, ProLiant 400, ProLiant ML330, ProLiant ML350, ProLiant DL360, ProLiant Servers and TaskSmart N2400. OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A PREREQUISTES: N/A EFFECTIVE DATE: 05-Jun-2002 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: SP19810 DESCRIPTION: Creates one System Erase utility diskette. This utility will enable the user to erase CMOS Factory Time/Date, CMOS checksum, EISA NVRAM (including environment variables, partitions on all hard drives, and Compaq Array controller configurations). New features: 1. Added support for Smart Array 5312. 2. Added support for Smart Array Cluster Storage boxes. To erase drives on the SCSI shared storage boxes, a "-sharedstorage" command line parameter must be added in the config.sys file on the erase floppy. Problems fixed: None. HOW TO USE: 1. Obtain One (1) formatted 1.44-MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. The following files will be created: qrst5.exe 276090xx._01 readme.1st where "xx" is US (English), or JP (Japanese). 4. Run qrst5.exe to create the diskettes. 5. After the diskettes have been created, you may delete the SoftPaq file downloaded in step 2 and all files generated if you wish. 6. To run the Compaq System Erase Utility, power down your computer, place the Compaq System Erase Utility diskette 1 in Drive A:, and power up your computer. Copyright 1993,2002 Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies