SOFTPAQ NUMBER: SP19668 PART NUMBER: N/A FILE NAME: Cpqadu.exe TITLE: Compaq Array Diagnostic Utility VERSION: 1.70.03 Rev A LANGUAGE: English CATEGORY: Diagnostics-Setup DIVISIONS: Systems PRODUCTS AFFECTED: The following Array Controllers: SMART, SMART-2/E, SMART-2/P, SMART-2SL, SMART-2DH, Smart Array 221, Smart Array 431, Smart Array 3100ES, Smart Array 3200, Smart Array 4200, Smart Array 4250ES, Smart Array 5300, Smart Array 5i, Smart Array 532, Integrated Smart Array, RAID LC2 Controller, Smart Array Cluster Storage, Fibre Channel Host Adapter/E (formerly the Fibre Channel Host Controller/E), Fibre Channel Host Adapter/P (formerly the Fibre Channel Host Controller/P), RA4000 (formerly the Fibre Channel Array Controller), 64-Bit/66-Mhz Fibre Channel Host Adapter OPERATING SYSTEM: Microsoft Windows NT 4.0 and Windows 2000 SYSTEM CONFIGURATION: N/A PREREQUISITES: The operating system device drivers for each of the array controller(s) of interest must be installed prior to running the Compaq Array Diagnostic Utility (ADU) in order for the ADU to properly detect the controller(s) and provide acurate diagnostic information. EFFECTIVE DATE: Feb 11, 2002 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 5.x SUPERSEDES: SP17843 DESCRIPTION: This SoftPaq contains all the files necessary for installing the Compaq Array Diagnostic Utility under Windows NT 4.0 and Windows 2000. ENHANCEMENTS/FIXES: - Added support for the Compaq Smart Array Cluster Storage Controller. - Fixed reporting of more than 16 logical units on SA221 and SA431 controllers. - Updated disabled codes to support ADG post error reporting. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The SoftPaq file that is downloaded is a self-extracting executable with a file name based on the SoftPaq Number above. 2. Execute the downloaded file and follow the on-screen instructions. 3. Press the Y key to confirm the unpacking of files into the download directory. 4. After the files have been unpacked, you may delete the self- extracting SoftPaq file downloaded in step 1. 5. [OPTIONAL] To create 2 diskettes containing the software, execute the file named MAKEDISK.BAT, which was created in the download directory in step 3. 6. To install the software on your Windows NT 4.0 or Windows 2000 system, execute the file named SETUP.EXE, which is located in the folder named DISK1, which was created in the download directory (or on diskette #1 if diskettes were created in step 5.) Follow the onscreen instructions to complete the software installation. 7. After the installation is completed, you may delete the files unpacked in step 2. Copyright 2002, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.