TITLE: ROMPaq for Evo D500, D300, and W4000 (686Y2 ROM) VERSION: 2.06 Rev A DESCRIPTION: This SoftPaq creates a ROMPaq firmware diskette that can be used to locally restore or upgrade the System ROM in the Compaq models below with a 686Y2 Family ROM. A backup of the current System ROM will be copied onto the ROMPaq diskette during the flash process. NOTE: The ROM Family and ROM date can be determined by running the Setup Utility by pressing F10 on the target computer during system power on of the computer, and viewing File/System Information. This information can be saved into a text file by selecting File/Save to Diskette. PURPOSE: Recommended Update SOFTPAQ NUMBER: SP19586 SUPERSEDES: SP18889 PART NUMBER: 254253-005 EFFECTIVE DATE: December 18, 2001 CATEGORY: ROMPaqs SSM SUPPORTED: No PRODUCT TYPE(S): Desktops, Workstations PRODUCT MODEL(S): Evo D500 Desktop: All Models Evo D500 CMT: All Models Evo D500 SFF: All Celeron and Pentium 4 Models Evo D300 Desktop: All Models Evo D300 CMT: All Models Evo D300 SFF: All Celeron and Pentium 4 Models Evo Workstation W4000 CMT: All Models Evo Workstation W4000 SFF: All Models OPERATING SYSTEM(S): Microsoft Windows XP Professional Microsoft Windows 2000 Microsoft Windows NT 4.0 Microsoft Windows 98 LANGUAGE(S): US (Global) ENHANCEMENTS: - Enhances display of network adapters in F10 Setup to include the vendor name. - When restoring F10 settings from diskette, the BIOS now has the user confirm the “save changes and exit” before saving device security settings. - Adds an option to F10 Setup to allow the integrated audio to be enabled even if a PCI audio card is present. Previous BIOS versions disabled the integrated audio automatically, without an option to enable it again, if a PCI audio card was detected in order to prevent resource conflicts between the PCI and integrated audio devices. - Enhances the F10 Setup “Save to Diskette” and “Restore from Diskette” features to prevent bad diskettes from causing a system lock-up. - Adds a type-11 record to the SMBIOS tables for use by service. - Adds support for certain Samsung USB keyboards. - Adds support for Compaq iPaq Home Phone Network Adapter (HPNA). - Adds support for Northwood Pentium 4 processors (specifically B0 stepping) - Adds support for core chipset MCH B0. - Adds support for new DDR platforms. FIXES: - Corrects the reporting of L1 and L2 cache type in the SMBIOS structure (information only). - Corrects the reporting of the L1 cache size in F10 Setup, from 8KB to 20KB to reflect the full L1 cache size in the Pentium 4 (information only). - Corrects the saving of the boot order information when saving settings from F10 setup to diskette when a USB boot device is set as “disabled” in the boot order. The previous BIOS version would save an invalid string in the settings file under this condition. - Makes a change to BIOS to correctly report the memory map of the EBDA in all cases. - Corrects the PCI resource settings when installing two SCSI devices of type Adaptec Dual Channel Ultra160 SCSI Card PCI Model AHA-39160 and Adaptec SCSI Card 29160 Ultra160 64-bit PCI. PREREQUISITES: N/A HOW TO USE: 1. Obtain a formatted 1.44-MB diskette and place it in your A: drive. 2. Download the SoftPaq to a directory on your hard drive. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions to build the ROMPaq diskette. 4. Place the newly created diskette in the A: drive of the computer to be upgraded or restored and cycle system power to boot from the ROMPaq diskette. 5. Follow the on-screen instructions to select the Compaq System ROM and flash the firmware. WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE UPGRADE PROCESS!!! Copyright 2001, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.