TITLE: ROM Image for Remote ROM Flash for Compaq Models with a 686P2 Family ROM VERSION: 3.11 Rev. A DESCRIPTION: This SoftPaq contains a binary image for the System ROM for the Compaq models below with a 686P2 Family ROM. This SoftPaq is used to remotely flash the System ROM on target PCs on a network, and it requires System Software Manager (SSM) or Remote Management Setup. The ROM Family and ROM date can be determined by running the Setup Utility by pressing F10 on the target computer during system power on of the computer, and viewing File/System Information. This information can be saved into a text file by selecting File/Save to Diskette. If you use System Software Manager (SSM) to deploy SoftPaqs within your organization, you must upgrade to SSM version 1.50 (SP17447), which supports all new and existing SoftPaq formats. For information on SSM, check "http://www.compaq.com/im/change/ssmwp.html. PURPOSE: Routine Release SOFTPAQ NUMBER: SP19581 SUPERSEDES: SP18871 PART NUMBER: N/A EFFECTIVE DATE: December 14, 2001 CATEGORY: ROMPaqs SSM SUPPORTED: Yes PRODUCT TYPE(S): Desktops, Workstations PRODUCT MODEL(S): Deskpro EN Series: P1.13GHz, P1.0GHz, P733 (na), P667 (na), C566 (na), P933, P866, P800, P733, P667, C600 Deskpro EN Series SFF: P1.13GHz (SFF), P1.0GHz (SFF), P733 (SFF-na), P667 (SFF-na), C566 (SFF-na),P933 (SFF), P866 (SFF), P800 (SFF), P733 (SFF), P667 (SFF), C600 (SFF) Deskpro Workstation AP230: All Models Evo D300 Small Form Factor: Celeron 1.1G 815e Chipset Celeron 1.0G 815e Chipset Evo D500 Small Form Factor: Celeron 1.1G 815e Chipset Celeron 1.0G 815e Chipset OPERATING SYSTEM(S): Microsoft Windows Millennium Edition (Me) Microsoft Windows 2000 Microsoft Windows 98 Microsoft Windows 95 Microsoft Windows for Workgroups 3.11 Microsoft Windows 3.1 Microsoft Windows NT 4.0 Microsoft Windows NT 3.51 Microsoft Windows NT 3.1 Microsoft MS-DOS LANGUAGE(S): Global ENHANCEMENTS: - Adds a new option in F10 Setup to allow enabling or disabling of the Integrated audio when a second audio card is present. FIXES: - Corrects a potential system lockup while using the Tracker 2000 mouse with optical sensor. - Changes PCI memory mapping buffer to allow better usage of memory by add-in devices. This corrects an issue when using the nVidia Geforce3 video card. - Corrects an issue with remote wake-up when using an IBM 16/4 PCI management NIC and Windows NT 4.0 operating system. - Corrects LED blink rate for ACPI S3 and S4 that were too fast on some systems. - Corrects a potential system lockup during POST when attempting to boot from the integrated NIC first and F10 Setup options are set to enable POST messages. PREREQUISITES: Compaq System Software Manager (SSM) or Remote Management Setup HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. Refer to the remote utility documentation for instructions on creating a Remote ROM Flash job to flash the System ROM on target PCs on the network. WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE UPGRADE PROCESS!!! Copyright (C)2001, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies