SOFTPAQ NUMBER: SP18762 PART NUMBER: N/A FILE NAME: N/A TITLE: Presario Specific Models System ROM Update (786K3 ROM) VERSION: 1.13 LANGUAGE: English (US) CATEGORY: ROMPaqs DIVISIONS: Consumer Desktops PRODUCTS AFFECTED: Presario 4090US, 4120EA, 4121EA, 4126EA, 5012AU, 5013LB, 5013US, 5095CL, 5100AN, 5100CA, 5100JP, 5101AP, 5101HK, 5101RSH, 5101TW, 5102AN, 5102AP, 5102CA, 5102US, 5103AN, 5103AP, 5103CL, 5103HK, 5103TW, 5105RSH, 5106CA, 5106CL, 5108US, 5109RSH, 5112JP, 5119EA, 5120EA, 5121EA, 5123EA, 5123SR, 5124AU, 5124EA, 5126EA, 5127EA, 5128EA, 5129EA, 5138EA, 5139EA, 5140EA, 5142EA, 5143EA, 5145EA, 5146EA, 5147EA, 5150WM, 5202HKr OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: September 4, 2001 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 5.0 SUPERSEDES: N/A DESCRIPTION: This SoftPaq creates a ROMPaq firmware diskette that can be used to locally restore or upgrade the System ROM in the above models. A backup of the current System ROM will be copied onto the ROMPaq diskette during the flash process. The ROM Family and ROM date can be determined by running the Setup Utility by pressing F10 on the target computer during system power on of the computer, and viewing Main/System Information. ENHANCEMENTS/FIXES: - Adds Smart drive error messages. - Adds support to show F12 network boot message. - Fixes issue where cursor skipped the 2nd century digit in F10 Setup Time and Date screen. - Updates counting of PCI slots. This corrects automatic audio card detection. - Adds Top Down MTRR support. This corrects system instability in large memory configurations (+512MB). HOW TO USE: 1. Obtain a formatted 1.44-MB diskette and place it in your A: drive. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions to build the ROMPaq diskette. NOTE: The ROMPaq diskette can be recreated if necessary by running QRST5.EXE from the download directory. 4. After the diskette has been created, you may delete the SoftPaq file downloaded in step 2. 5. Place the newly created diskette in the A: drive of the computer to be upgraded or restored and cycle system power to boot from the ROMPaq diskette. 6. Follow the on-screen instructions to select the 7/26/01 Compaq System ROM and flash the firmware. WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE UPGRADE PROCESS!!! Copyright 2001, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.