SOFTPAQ NUMBER:  SP18483
PART NUMBER:  N/A
FILE NAME:  Prosetp.cpl
TITLE:  Dual Intel PRO/100+ NIC Installation Software for Notebooks with Windows NT 4.0
VERSION:  1.00
LANGUAGE:  US English

CATEGORY:  Drivers (Special)

DIVISIONS:  Portables
 
PRODUCTS AFFECTED:  Compaq Armada M300 (Select Models)
                    Compaq Armada M700 (Select Models) 
                    Compaq Armada V300 (Select Models)
                    Compaq Armada E500 (Select Models)
                    Compaq Armada E700 (Select Models)
                    Compaq Prosignia 170 (Select Models)
                    Compaq Prosignia 190 (Select Models)
                    Compaq Evo N400c (Select Models)

OPERATING SYSTEM:  Microsoft Windows NT 4.0	

SYSTEM CONFIGURATION:  Intel PRO/100+ MiniPCI NIC and
		       Docking Station with Intel PRO/100+ Management Adapter with Alert on LAN
		       
EFFECTIVE DATE:  August 14, 2001

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  5.x

SUPERSEDES:  N/A

DESCRIPTION:  Contains the files needed to install the Intel PRO/100+ MiniPCI NIC and the
	      Intel PRO/100+ Management Adapter with Alert on LAN as separate devices
	      for a notebook computer running Windows NT 4.0.

HOW TO USE:

1.  Copy your current set of Intel NIC drivers to a new directory
on your hard drive (example C:\Program Files\Compaq\CPQLANModem\Dual Network\).
In the new directory, make a copy of the file E100BNT.sys and rename the copy 
to E100MNT.sys. Insure all of the files in the new directory are NOT write protected. 
Download the SoftPaq to this same directory. The file that is
downloaded is a self-extracting executable with a filename based on the SoftPaq
Number above.

2.  From that directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory. You
should accept the default which is the download directory.

3.  After the files have been unpacked, you may delete the  
self-extracting file downloaded in step 1.

NT 4.0 NIC DRIVER REMOVAL: Currently installed drivers must be removed, not updated.

	a. Select Start, Settings, then Control Panel.
	b. Double click the "Network" icon.
	c. Select the "Adapters" tab.
	d. Select the "Intel(R) PRO/100+ MiniPCI".
	e. Select the "Remove" button.
	f. Select the "Yes" button to permanently remove the component from the system.
	g. Select the "Intel(R) PRO/100+ Management Adapter with Alewrt on LAN".
	h. Select the "Remove" button.
	i. Select the "Yes" button to permanently remove the component from the system.
	j. Select the "Yes" button to remove the associated files.
	k. Select the "Close" button.
	
NT 4.0 NIC DRIVER INSTALLATION:

	a. Select Start, Settings, then Control Panel.
	b. Double click the "Network" icon.
	c. Select the "Adapters" tab.
	d. Select the "Add" button
	e. Select the "Have Disk" button
	f. Type in the directory path chosen in step 1.
	   example: C:\Program Files\Compaq\CPQLANModem\Dual Network\
	g. Select the "OK" button, or press Enter
	h. Select the "Intel(R) PRO Adapter" (for the Docking Station NIC).
	i. Select the "OK" button. This will install the
	   "Intel(R) PRO/100+ Management Adapter with Alert on LAN".
	j. Repeat steps d, e, f, and g.
	k. Select the "Intel PRO MiniPCI Adapter" (for the embedded Mini PCI NIC).
	l. Select the "OK" button. This will install the
	   "Intel(R) PRO/100+ MiniPCI".
	m. Select the "Close" button.
	n. Select the desired Network Properties for each adapter (ie. DHCP, etc.).
	o. Select the "OK" button.
	p. Select the "Yes" button to restart your computer.

NT 4.0 NIC DRIVER VERIFICATION:

	a. Select Start, Settings, then Control Panel.
	b. Double click the "Devices" icon.
	c. The device list should contain two Intel NIC drivers:
	   "Intel(R) PRO MiniPCI NDIS Driver"
	   "Intel(R) PRO NDIS Driver"
	d. Select the "Close" button.

NT 4.0 HARDWARE PROFILE CONFIGURATION:

	a. Select Start, Settings, then Control Panel.
	b. Double click the "System" icon.
	c. Select the "Hardware Profiles" tab.
	d. Using the "Copy" and "Rename" buttons, create desired profiles.
	   (ie. Docked Network, Undocked Network, No Network).
	e. Use the UP/DOWN arrows to the right of the profile list to
	   set the desired DEFAULT (top) Hardware Profile.
	f. Select the "Apply" button.
	g. Select the "OK" button.
	h. On the Control Panel window, double click the "Devices" icon.
	i. Select the "Intel(R) PRO MiniPCI NDIS Driver" device,
	   then select the "HW Profiles" button.
	j. Select the "Docked Network" profile, then select the "Disable" button.
	k. Select the "No Network" profile, then select the "Disable" button.
	l. Select the "OK" button.
	m. Select the "Intel(R) PRO NDIS Driver" device,
	   then select the "HW Profiles" button.
	n. Select the "Undocked Network" profile, then select the "Disable" button.
	o. Select the "No Network" profile, then select the "Disable" button.
	p. Select the "OK" button.
	q. Select the "Close" button.
	r. Select Start, Shutdown, Restart, then select the "OK" button.
	s. When the computer restarts, select the desired Hardware Profile configuration.


Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies