SOFTPAQ NUMBER: SP18229 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Power Management 32 VERSION: 4.10 Rev. B LANGUAGE: Norwegian (NO) CATEGORY: Operating System Enhancements DIVISIONS: Commercial Portables PRODUCTS AFFECTED: Compaq Evo N400c Series Compaq Evo N600c Series Compaq Armada E500 Series Compaq Armada V300 Series Compaq Armada E700 Series Compaq Armada M700 Series Compaq Armada M300 Series Compaq Armada 7400 Family Compaq Armada 7800 Family Compaq Armada 1700 Family Compaq Armada 1750 Family Compaq Armada 3500 Family Compaq Armada 7700 Series Compaq Armada 7300 Series Compaq Armada 1500 Family Compaq Armada 4100 Series Compaq Armada 4200 Series OPERATING SYSTEM: Microsoft Windows XP Microsoft Windows Millennium Edition (Me) Microsoft Windows 2000 Microsoft Windows NT 4.0 with Service Pack 3 Microsoft Windows 98 Microsoft Windows 95 OSR2 SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: August 23, 2001 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 5.0 SUPERSEDES: SP17008 DESCRIPTION: Provides power management features for Compaq Armada and Evo portable computers. Gives flexibility to balance battery life and machine performance. ENHANCEMENTS/FIXES: - Adds support for Windows XP. - Fixes startup and shutdown issues in dual boot Windows XP / Windows NT 4.0 environment. - Fixes issues with displaying battery serial number and asset tag information. - Adds message when calibration is aborted due to disconnecting AC power. - Fixes problem with Compaq Power page being cut-off in Simplified Chinese and Taiwanese. - Provides easier use with Compaq System Software Manager (SSM) by moving .CVA files inside Softpaq. - Fixes minor memory leak issue. - Fixes problem with not being able to format a drive via Disk Administrator in Windows NT 4.0. - Fixes problem with unreadable characters in the "Compaq Power" tab on Korean systems. - Fixes minor issue with common controls being inconsistently located across the various tabs. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. Execute the downloaded file and follow the on-screen instructions. Entering "Y" to confirm the unpacking of files creates 3 new directory folders in the download directory. All files are unpacked into these newly created directory folders. 3. After the directory has been created, you may delete the self-extracting file downloaded in step 1. 4. To create the optional installation diskette(s), run MAKEDISK.BAT and follow the on-screen instructions. 5. To install, run SETUP.EXE from either the DISK1 subdirectory (created in step 2 above) or from diskette #1 (if you created diskettes in step 4 above). Follow the directions on the screen. 6. After the installation is completed, you may delete the directory folders created in step 2 if you wish. Copyright 2001, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies