SOFTPAQ NUMBER: SP17491 PART NUMBER: N/A FILE NAME: ICHREV.EXE TITLE: ICH2 Version Checker VERSION: 1.00 Rev A LANGUAGE: US CATEGORY: Software Solutions DIVISIONS: Desktops PRODUCTS AFFECTED: Compaq Deskpro ENC, Deskpro ENL, Deskpro EN SFF, Deskpro Workstation DW300, iPAQ NOTE: This utility has been developed for the products listed above, however it can be used on any product to determine if there is an ICH2 present. OPERATING SYSTEM: Microsoft Windows 98 (bootable diskette) SYSTEM CONFIGURATION: Requires diskette drive PREREQUISITES: N/A EFFECTIVE DATE: May 02, 2001 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.0 SUPERSEDES: N/A DESCRIPTION: This creates a bootable diskette containing a utility that scans the PCI buses to detect the ICH2 stepping. The stepping of the ICH2 and the bus, device and function details are displayed on the screen. The utility identifies the B0, B1,B2,B4 and xB0 stepping. HOW TO USE: 1. Download the SoftPaq to a temporary, empty directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. Execute the downloaded file and follow the on-screen instructions. A blank formatted 1.44MB diskette is required to create the bootable diskette. 3. After the files have been unpacked, you may delete the self-extracting file downloaded in step 1. 4. To run the utility, insert the newly created diskette in the FDD and boot the unit. The utility will load and will scan all PCI buses, devices and functions for the presence of the ICH2. If the ICH2 is detected the ICH2 stepping and PCI bus, device and function information will be displayed on the screen. If the ICH2 device is not detected then a screen prompt is displayed that indicates this. Copyright 2001, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies