SOFTPAQ NUMBER:  SP17170
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Server Support for Microsoft Windows NT 4.0
        (Video Drivers)
VERSION:  2.22 Rev A
LANGUAGE:  Japanese

CATEGORY:  Drivers

DIVISIONS: Systems

PRODUCTS AFFECTED: ProLiant 400,ProLiant 800,ProLiant 850R,ProLiant 1000,
 ProLiant 1200,ProLiant 1200R,ProLiant 1500,ProLiant 1500R,ProLiant 1600,
 ProLiant 1850R,ProLiant 2000,ProLiant 2500,ProLiant 2500R,ProLiant 3000,
 ProLiant 3000R,ProLiant 4000,ProLiant 4500,ProLiant 4500R,ProLiant 5000,
 ProLiant 5000R,ProLiant 5500,ProLiant 6000,ProLiant 6400R,ProLiant 6500,
 ProLiant 7000,ProLiant 8000,ProLiant 8500,ProLiant CL380,ProLiant CL1850,
 ProLiant DL320,ProLiant DL360,ProLiant DL380,ProLiant DL580,
 ProLiant ML330,ProLiant ML350,ProLiant ML370,ProLiant ML530,
 ProLiant ML570,ProSignia 200,ProSignia 300,ProSignia 486,ProSignia 500,
 ProSignia 720,ProSignia 740,ProSignia VS,Systempro,Systempro/e,
 Systempro/LT,Systempro/XL

OPERATING SYSTEM:  Microsoft Windows NT 4.0 (Japanese)

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  29 Mar 2001

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP15872

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode. This SoftPaq creates two files -- a description 
file and a self-extracting executable file.  The self-extracting 
executable file contains Compaq Server Support for Microsoft Windows NT 
4.0 that supports the following subsystems and features of Compaq Servers:

   ATI RAGE IIC Video Display Controller
   ATI Rage XL PCI Video Display Controller
   Compaq Server Support Installation Utility

Enhancements/Fixes:

Features in Compaq SSD for Windows NT 4.0 Version 2.22 Rev. A

The release of the Compaq Server Support for Microsoft Windows 
NT 4.0 Version 2.22 Revision A primarily supports the following 
new products: 

    Compaq Universal Hot Plug Tape.
    Compaq ProLiant ML330 with ATA array.

Compaq System Management Driver 

    Updated version to 3.33.01
    Corrected an issue with detecting and reporting single-bit correctable 
    memory errors on the following systems:
        Compaq ProLiant 800 (configured with P14 or P18 ROM)
        Compaq ProLiant 1600 (configured with P08 ROM)
        Compaq ProLiant 1850R

    Single-bit correctable memory errors were not being detected or logged 
    by the driver.  This issue was introduced in version 3.24.01 of the 
    driver, which was available on version 2.16A of the Compaq Server Support 
    Software for Microsoft Windows NT 4.0.

For details, refer to NTREADME.HLP in the created support files.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
   to that directory.  The file that is downloaded is a self-extracting
   executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
   and follow the on-screen instructions to unpack the files.
   The number of files to be created and total file size is displayed.
   You will be given the chance to specify the target directory for 
   the files, or default to the download directory.
   The following files will be created:
       README.TXT
       VIDEO.EXE

3. After the files have been created, you may delete the  
   self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
   self-extracting executable:
       VIDEO.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
   software files to a folder on your hard drive and run the program 
   SETUP.EXE to install the software.


Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.