SOFTPAQ NUMBER: SP16870 PART NUMBER: N/A FILE NAME: N/A TITLE: Armada M300 Remote System BIOS (ROM) Upgrade (686R ROM) VERSION: 01.02.15 LANGUAGE: English CATEGORY: ROMPaqs DIVISIONS: Portables PRODUCTS AFFECTED: Compaq Armada M300 Series OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A PREREQUISITES: Remote Management Software EFFECTIVE DATE: March 07, 2001 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 5.0 SUPERSEDES: SP15901 DESCRIPTION: This SoftPaq creates .CAB files that contain a binary image for the System ROM for Armada M300 Series notebooks. The BIOS/ROM image file must be used with Remote Management Software in order to actually flash (upgrade) the ROM image on one of the affected Armada notebooks. The ROM Family and ROM date can be determined by running F10 Setup. Enhancements/Fixes: - Remove ZIP drive bootability. - Improve battery charge fail detection. - Fix fan error in ACPI HCT. - Fix problem where obsolete Compaq Enhanced III keyboard does not work after Suspend/Resume. - Fix problem where docking station info is not correct. - Ignore new keys during keyboard reset. - Fix lockup after flash update. - Speedstep 900MHz/1GHz workaround; Force the unit to run the in the slow Speedstep mode (battery optimized mode) when on DC. - Fix problem where disabled infrared will be enabled after restore from hibernation and warm boot. HOW TO USE: 1. Download the SoftPaq to a temporary, empty directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. The BIOS/ROM image file must be used with Remote Management Software in order to actually flash (upgrade) the ROM image on one of the affected Armada notebooks. 3. When used with SSM, copy the SoftPaq to the file store. 4. When used with WINFLASH, run the SoftPaq to get the .cab file. Copyright 2001, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies