SOFTPAQ NUMBER: SP16069 PART NUMBER: 168210-401 FILE NAME: N/A TITLE: ROMPaq for Professional Workstations SP750 and AP550 (686J4 ROM) VERSION: 3.01 Rev A LANGUAGE: English (US) CATEGORY: ROMPaqs DIVISIONS: Workstations PRODUCTS AFFECTED: Professional Workstation SP750: All Models Professional Workstation AP550: All Models OPERATING SYSTEM: Microsoft Windows 2000 Microsoft Windows 98 Microsoft Windows 95 Microsoft Windows NT 4.0 Microsoft Windows NT 3.51 Microsoft MS-DOS SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: March 6, 2001 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 5.0 SUPERSEDES: SP15794 DESCRIPTION: This software creates a bootable ROMPaq firmware diskette that can be used to restore or upgrade the system ROM in the Professional Workstation models AP550 and SP750 with a 686J4 family ROM. The ROM family and ROM date can be determined by running F10 Setup. A unique feature of the ROM is one that allows the user to select the language used in F10 Setup. The user may choose between Danish, Dutch, English, Finnish, French, German, Italian, Japanese, Norwegian, Portuguese, Spanish, or Swedish. Please note however, that the user sees the chosen language only in F10 Setup, not in the operating system. ENHANCEMENTS/FIXES: - Added PCI configuration compensation for Phillips video capture card. - Added microcode patches for latest stepping. - Corrected IDE flow for CD boot when image is emulating a hard disk. - Corrected PCI option ROM download algorithm for system configurations with large PCI memory address locations. HOW TO USE: 1. Obtain a formatted 1.44-MB diskette and place it in your A: drive. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions to build the ROMPaq diskette. 4. After the diskette has been created, you may delete the SoftPaq file downloaded in step 2. 5. Place the newly created diskette in the A: drive of the computer to be upgraded or restored and cycle system power to boot from the ROMPaq diskette. 6. Follow the on-screen instructions to select the v3.01 Compaq System ROM and flash the firmware. WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE UPGRADE PROCESS!!! Copyright 2001, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies