SOFTPAQ NUMBER: SP15873 PART NUMBER: 386577-695, 386578-695 FILE NAME: N/A TITLE: Server Diagnostics (Japanese) VERSION: 10.32J Rev A LANGUAGE: Japanese CATEGORY: Diagnostics-Setup DIVISIONS: Systems PRODUCTS AFFECTED: ProLiant 8500: All Models ProLiant 8000: All Models ProLiant 7000: All Models ProLiant 6500: All Models ProLiant 6400R: All Models ProLiant 6000: All Models ProLiant 5500: All Models ProLiant 5000: All Models ProLiant 4500: All Models ProLiant 4000: All Models ProLiant 3000: All Models ProLiant 2500: All Models ProLiant 2000: All Models ProLiant 1850R: All Models ProLiant ML570: All Models ProLiant ML530: All Models ProLiant ML330: All Models ProLiant ML370: All Models ProLiant ML350: All Models ProLiant DL580: All Models ProLiant DL380: All Models ProLiant DL360: All Models ProLiant CL1850: All Models ProLiant CL380: All Models ProLiant 1600: All Models ProLiant 1500: All Models ProLiant 1200: All Models ProLiant 1000: All Models ProLiant 850R: All Models ProLiant 800: All Models ProLiant 400: All Models Prosignia Server 720: All Models Prosignia Server 740: All Models ProLiant 8500 Data Center: All Models ProLiant DL320: All Models OPERATING SYSTEM: Microsoft Windows Me Microsoft Windows 2000 Microsoft Windows 98 Microsoft Windows 95 Microsoft Windows NT 4.0 Microsoft Windows NT 3.51 Microsoft Windows NT 3.1 Microsoft MS-DOS SCO UnixWare 7 SCO OpenServer 5 Linux Sun Solaris 8 Intel Platform Edition Red Hat Linux Banyan VINES Microsoft Windows NT Server SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: Nov. 10, 2000 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: SP14558 DESCRIPTION: This SoftPaq is for Japanese products, and cannot be run in United States mode. It creates two separate diskettes for the TEST utility and INSPECT utility (different from U.S. version of Server Diagnostics, which creates only one diskette). Server Diagnostics support currently shipping Systems Division server products. It is installed on the Diagnostics Partition for those systems which support it and have hard drives. It is shipped as a diskette on all other products. Enhancements/fixes: - Added support for drives larger than 30GB. - Reduced memory test time by 15%. - Added support to turn cache off during long test for ML530 and DL320 memory. - Added Support for Integrated Smart Array Controller. - Added SCSI support for ML330. - Added Support for Compaq 64-Bit/66-MHz Wide Ultra3 SCSI - Added Support for DL320 - Corrected CMOS clock losing or gaining time during some tests. - Improved accuracies in device test time shown in diag log file. - Fixed CPU test to prevent system lockup with 3 CPUs in DL580. - Memory block count no longer scrolls off screen during test. - No longer report erroneous "SCSI Over Temperature" while identifying SCSI devices in diags. HOW TO USE 1. Obtain two (2) formatted 1.44-MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert the formatted diskettes in a drive to create the diskettes. 4. After the diskettes have been created, you may delete the SoftPaq file downloaded in step 2. 5. For installation instructions, run README on the 1st created diskette. Copyright 2000, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.