SOFTPAQ NUMBER: SP15806 PART NUMBER: 159915-003 FILE NAME: N/A TITLE: Presario Specific Models System ROM Update #2 for Models Sold in 1999 VERSION: 2.02 Rev A LANGUAGE: English CATEGORY: ROMPaqs/BIOS and Firmware DIVISIONS: Consumer PRODUCTS AFFECTED: Presario 5352, 5373, 5394, 5452, 5456, 5471, 5472, 5473, 5474, 5475, 5476, 5477, 5485, 5600S, 5680, 5700N, 5700T, 5711, 5712, 5713, 5714, 5715, 5716, 5717, 5718, 5721, 5722, 5724, 5725, 5726, 5728, 5733, 5735, 5736, 5738, 5745, 5746, 5822, 5827, 5832, 5834, 5835, 5836, 5852, 5856, 5863, 5865 OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: October 27, 2000 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.01 SUPERSEDES: SP11738, SP11600 DESCRIPTION: This SoftPaq creates a bootable Compaq Presario ROMPaq Update Diskette, which can be used to update the System ROM to the following versions for the following Presario models: ROM Presario Model ROM Version -------------------------------------------------------------------------- 686S1 5700T, 5713, 5716, 5717, 5718, 5722, 5725, 5726, 5728, 10/13/99 5733, 5735, 5736, 5738, 5745, 5746, 5836, 5856 5863, 5865 686S5 5600S, 5680 10/13/99 686C2 5352, 5373, 5394, 5411, 5446, 5452, 5456, 5471, 5472, 10/03/00 5473, 5474, 5475, 5476, 5476, 5477, 5485, 5700N, 5711, 5712, 5714, 5715, 5721, 5724, 5822, 5827, 5832, 5834, 5835 All the ROMs in this SoftPaq contain BIOS support for the Year 2000. Note: Not all software uses the BIOS for Year 2000 support. The Year 2000 support in these ROMs will not fix all Year 2000 problems that may exist in the software that is installed on your system. Enhancements/Fixes: Presario Models 5352, 5373, 5394, 5411, 5446, 5452, 5456, 5471, 5472, 5473, 5474, 5475, 5476, 5476, 5477, 5485, 5700N, 5711, 5712, 5714, 5715, 5721, 5724, 5822, 5827, 5832, 5834, 5835 In this SoftPaq: - Fixed issue with certain VGA cards causing lock-ups. - Improved USB legacy support for int'l keybrds. - Fixed issue with Chicony Venice Keyboard firmware bug. - Fix WinMe hibernation hang with Logitech scroll mouse. - Changed default FDD parm table from 1.2M to 1.44M disk. - Added support for higher flash memory configurations. - Added support for upgraded video BIOS. - Added support for higher speed processors. The following were fixed in Sp11738 and are also included in this SoftPaq: - Workaround added for a Windows 98 Second Edition device power management issue that caused a flashing hourglass when a phone cord was plugged in while the system was awake. - Fixes an issue with upgrade audio cards that make use of motherboard specific features. - Added support for drives larger than 32G Bytes. - Updated to new video BIOS version 2.01. - Fixed a hang in the mouse driver that only occured when both a PS2 keyboard and USB mouse were connected. Presario Models 5700T, 5713, 5716, 5717, 5718, 5722, 5725, 5726, 5728, 5733, 5735, 5736, 5738, 5745, 5746, 5836, 5856, 5863, 5865 In this SoftPaq: There is no update from SP11738. The following were fixed in Sp11738, SP11600 and also included in this SoftPaq: - Fix for an ATI Rage 128 AGP card hang issue during power up. - Added latest CPU patches from Intel for new versions of the processors. - Fixed a problem where an incorrect CPU might be reported if the system is upgraded with a new CPU. - Fixed UDMA support for some UDMA66 drives. Presario Models 5600S, 5680 In this SoftPaq: There is no update from SP11738. The following were fixed in SP11738, SP11600 and also included in this SoftPaq: - Fix for an ATI Rage 128 AGP card hang issue during power up. - Fixed a problem where an incorrect CPU might be reported if the system is upgraded with a new CPU. - Fixed UDMA support for some UDMA66 drives. - Fixed a problem that caused a conflict between the system video card and some third party video cards (Voodoo 3). - ACPI fixes and updates for Windows 2000. - Configure power button as on/off for non-ACPI modes (such as MS-DOS). - Fixes for floppy Japanese 3-mode and 720kb support and timing issues. - Fixed a problem that prevented the installation of an Adaptec AHA-2940UW PCI SCSI card. - Fixes for timing and configuration issues with some hard drives and CDROMs. - Fix for losing printer when restarting to MS-DOS. - Fix for Asus Banshee video card. HOW TO USE: 1. Format a 1.44-MB diskette. 2. Download the SoftPaq to a temporary, empty directory on your hard drive and change to that directory. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the SoftPaq file. You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to create the ROMPaq diskette. 4. After the files are created, you may delete the downloaded file if you wish. 5. Place the ROMPaq diskette into drive A: of the computer you wish to update and turn on the power or reboot the computer, allowing it to boot from the diskette. 6. Follow the instructions on the screen to continue. 7. Select the ROM version to be installed. 8. The ROMPaq diskette will automatically update the System ROM and notify you when the update is finished. DO NOT TURN OFF YOUR COMPUTER'S POWER DURING THIS PROCESS 9. When the ROM update is finished, you will need to turn the computer off and back on for the changes to be in effect. Remove the ROMPaq diskette from the computer. Turn the computer's power switch OFF, wait 15 seconds, then turn the switch ON again. IMPORTANT: When the power switch on the back of the unit is switched off, the power protection features of the power supply require that the switch be in the off position for up to 15 seconds before being switched back on. Otherwise, the power supply might not turn on. Copyright 2000, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.