SOFTPAQ NUMBER: SP15621 PART NUMBER: N/A FILE NAME: SP15621.EXE TITLE: Single Point Solution Systems ROMPaq Firmware Upgrade Diskette for Compaq Prosignia 720 and ProLiant 400 Servers. VERSION: 09/21/2000 LANGUAGE: English CATEGORY: ROMPaqs DIVISIONS: Systems PRODUCTS AFFECTED: Compaq Prosignia 720 and ProLiant 400 Servers OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: September 28, 2000 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: N/A DESCRIPTION: This release provides a Single Point Solution User ROMPaq diskette for the Compaq Prosignia 720 and ProLiant 400 Servers. New Features - D01/F01 Compaq Prosignia 720 and ProLiant 400 system ROM (09/21/2000) ========================================================= Adds support for the following controllers: Array LC-2 64 bit/66 Mhz Dual Channel Wide Ultra3 SCSI 64 bit/66 MHz Single Channel Wide Ultra3 SCSI Problems Fixed - D01/F01 Compaq Prosignia 720 and ProLiant 400 system ROM (09/21/2000) ========================================================= Fixes an issue with the Compaq Smart Array 431 controller not being recognized as the primary boot controller. Known Problems - None. HOW TO USE: 1. Obtain a formatted 1.44 MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP15621.EXE. 3. From that drive and directory, execute the SoftPaq file: SP15621.EXE [ENTER] You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to create diskette. 4. After the diskette is created, you may delete the downloaded file SP15621.EXE if you wish. 5. Refer to README.TXT on the diskette for instructions on installing and using the software. Copyright 2000, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies