SOFTPAQ NUMBER: SP15337 PART NUMBER: 173613-008 FILE NAME: N/A TITLE: ROMPaq for Deskpro EC Series, EP Series, EN Series, and EN Series SFF (686J1 ROM) VERSION: 686J1_v3.10 LANGUAGE: English CATEGORY: ROMPaqs DIVISIONS: Desktops PRODUCTS AFFECTED: Compaq Deskpro EP Series, Deskpro EN Series, and Deskpro EN Series SFF models C466/810, C500/810, P450+/810e, P500/810e, P533/810e, and P600/810e. Compaq Deskpro EC Series models C466/810e, C500/810e, P500/810e, P533/810e, P550/810e, and Deskpro EP Series models a/C466/810e, a/C500/810e, a/P500E/810e, a/P550E/810e, and a/P600E/810e with a 686J1 Family ROM NOTE: Run F10 Setup to determine the ROM Family and ROM date. OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: August 30, 2000 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: SP13761 and SP13979 DESCRIPTION: This creates a ROMPaq firmware diskette that can be used to restore the System ROM in the above Deskpro Series models with a 686J1 Family ROM. The ROM Family and ROM date can be determined by running F10 Setup. A unique feature of the ROM is one that allows the user to select the language used in F10 Setup. The user may choose between Danish, Dutch, English, Finnish, French, German, Italian, Japanese, Norwegian, Portuguese, Spanish, or Swedish. Please note however, that the user sees the chosen language only in F10 Setup, not in the operating system. Enhancements/Fixes in this version: - Adds support for new revisions of the C0 stepping Intel(R) Pentium III processor. - Corrects an issue with DirectX 6.1 and large amounts of memory under Windows 95. - Upgrades, if applicable, the embedded network controller option ROM to Intel(R) Boot Agent Version 3.0.05 & PXE 2.0 Build 078. This corrects a Windows 2000 RIS installation issue that caused the system to fail on the initial reboot. HOW TO USE: 1. Obtain a formatted 1.44-MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. 4. After the diskette has been created, you may delete the SoftPaq file downloaded in step 2. 5. Keeping the newly created diskette in the A: drive, cycle system power to boot from the ROMPaq diskette. 6. Follow the on-screen instructions to select the v3.10 Compaq System ROM and flash the firmware. Copyright 2000 Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.