SOFTPAQ NUMBER: 15328 PART NUMBER: N/A FILE NAME: N/A TITLE: Client32 for DOS lockup fix for NC series adapters. VERSION: 1.75 LANGUAGE: English CATEGORY: Drivers DIVISIONS: NetSP PRODUCTS AFFECTED: Compaq Fast Ethernet Controllers: NC1120, NC3120, NC3121, NC3122, NC3123, NC3131, NC3132, NC3133, NC3134, NC3135, NC3160, NC3161, NC3162, NC3163 OPERATING SYSTEM: Client32 for DOS SYSTEM CONFIGURATION: Any one of the listed adapters in a client32 for DOS environment. PREREQUISITES: N/A EFFECTIVE DATE: 8/16/00 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 4.X SUPERSEDES: SP13945 DESCRIPTION: During file copies from a server, the copying process will stop, and the client's screen will lockup and remain frozen in the same position until the client is rebooted. This problem only occurs with the 32 bit N100.LAN driver in a client32 DOS environment. Enhancements/Fixes: This softpaq resolves the lockup issue.The N100c32 files included in this softpaq are for use with Novell's client32 for DOS only, and should not be used on a NetWare server. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an self-extracting executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions. Enter "Y" to confirm the unpacking of files into the downloaded directory. 3. After the files have been unpacked, you may delete the SoftPaq file downloaded in step 1. 4. Replace the N100.LAN and N100.LDI files on the client hard drive or diskette with the files included in this softpaq. 5. Load the N100C32.LAN driver for your client. Copyright 2000, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies