SOFTPAQ NUMBER: SP13491 PART NUMBER: 290812-007 FILE NAME: N/A TITLE: Armada 4200 Rompaq Upgrade Diskette (September 01, 1999) VERSION: 586J2_0901.99 LANGUAGE: US English CATEGORY: ROMPaqs DIVISIONS: Portables PRODUCTS AFFECTED: Compaq Armada 4200 Series OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: May 5, 2000 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 4.0 SUPERSEDES: SP11735 (ROM dated 08/30/99) DESCRIPTION: Creates the ROMpaq Firmware Upgrade Diskette for Compaq Armada 4200 Series notebooks, which allows a user to upgrade to a 09/01/99 System ROM. Enhancements/Fixes: - Resolves unit lockup during POST if Microsoft Windows 2000 hangs during installation. Enhancements in this release include changes that were also implemented in previous ROM versions dated 11/03/97, 02/03/98, 04/17/98, 05/21/98 and 08/30/99: - NSTL YMark2000 is removed from 08/30/99 version to preserve NSTL Warranty assurances. - The 05/21/98 ROM ensures correct installation of some external PS2 mice. - Bar Code Reader Support. Provides support for bar code readers on all Armada 4200 products. - Resolves issue of system lockup during ROM upgrade experienced with previous ROM releases. - NSTL Year 2000 Compliance The 02/03/98 ROM ensures that compliance will be maintained should NSTL (an independent testing organization that has developed a set of criteria for Year 2000 compliance on PCs) release a new version of automated tests that checks for correct rollover from the year 1999 to 2000. - Non System Disk Error Repetitive rebooting of the system causes the hard drive not to be detected on certain boots. The 02/03/98 ROM allows for the hard drive to be detected properly on every boot and not display a non-system disk error. - FDD Lost After Resuming After restarting the system to DOS from Windows 95 and entering hibernation, the diskette drive is not detected upon resuming. The 02/03/98 ROM allows for the diskette drive to be detected upon resuming from hibernation. - Detect Expansion Memory Type Correctly Allows for FPM/EDO expansion memory to be detected correctly. Previously, FPM/EDO expansion memory types were not detected properly, causing the system not to perform to its full potential. HOW TO USE: 1. Obtain a formatted 1.44-MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert the formatted diskette in a drive to create the diskette. 4. After the diskette has been created, you may delete the SoftPaq file downloaded in step 2. 5. Power down the computer. 6. Place the newly created Compaq Armada 4200 ROMpaq diskette in Drive A: and power up the computer. Follow the instructions on the screen to upgrade the System ROM. IMPORTANT: DO NOT TURN OFF POWER TO THE SYSTEM WHILE PERFORMING THIS PROCEDURE! Copyright 2000, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies