SOFTPAQ NUMBER:  SP12806
PART NUMBER:  N/A
FILE NAME:  NTST460.EXE
TITLE:  Compaq Storage Agents for Microsoft Windows NT (Japanese)
VERSION:  4.60 Rev A
LANGUAGE:  Japanese

CATEGORY:  Software Solutions

DIVISIONS:  Systems

PRODUCTS AFFECTED:  Compaq ProLiant, ProSignia and SystemPro Servers

OPERATING SYSTEM:  Microsoft Windows NT 3.51 (Japanese)
                   Microsoft Windows NT 4.0 (Japanese)

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:
  Microsoft Window NT 3.51
    Microsoft Windows NT 3.51 Service Pack 5
    Compaq SSD version 1.37a or later for Windows NT 3.51
    Compaq Foundation Agents 4.60 for Microsoft Windows NT

  Microsoft Windows NT 4.00
    Compaq SSD version 2.16a or later for Windows NT 4.00
    Compaq Foundation Agents 4.60 for Microsoft Windows NT

EFFECTIVE DATE:  January 24, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP12224

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  This SoftPaq creates two files -- a description
file and a self-extracting executable file.  The self-extracting executable 
file contains Compaq Storage Agents for Microsoft Windows NT
Version 4.60A (Japanese).

Enhancements/Fixes:

   Support was added for the new Drive Array controller:     
      Compaq Smart Array 431 Controller

   Support was added for the new Fibre Channel host bus adapter:
      Compaq StorageWorks 64-Bit/66-Mhz Fibre Host Bus Adapter

   Support was added for tape drives attached to Drive Array controllers.

   Support was added for the DDS4 Autoloader tape drive.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       NTST460.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       NTST460.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 2000, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.