SOFTPAQ NUMBER: SP11876 PART NUMBER: N/A FILE NAME: N/A TITLE: Intel 3D Direct AGP Graphics Video Driver for Windows 95/98 VERSION: 4.11.01.1272 Revision E LANGUAGE: Multi-Lingual CATEGORY: Drivers DIVISIONS: Commercial Desktops PRODUCTS AFFECTED: Deskpro EN Series: C500/810,C466/810 Deskpro EP Series: C500/810,C466/810 Deskpro EN Series SFF: C500/810,C466/810 Deskpro EP Series: P533/810e, P600/810e, P667/810e, P500/810e, P450+/810e Deskpro EN Series SFF: P533/810e, P600/810e, P667/810e, P500/810e, P450+/810e OPERATING SYSTEM: Microsoft Windows 95 Microsoft Windows 98 SYSTEM CONFIGURATION: Intel(R) 810 Chipset Graphics Intel(R) 810 Chipset Graphics (DC 100) Intel(R) 810e Chipset Graphics (DC 133 FSB133) Intel(R) 810e Chipset Graphics (DC 133) PREREQUISITES: N/A EFFECTIVE DATE: October 24, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 4.X SUPERSEDES: SP11382 DESCRIPTION: This SoftPaq contains the Windows 95/98 graphics driver for the Intel 3D Direct AGP Graphics chipset in the Deskpro EN and EP Series models listed above. IMPORTANT: This driver ONLY supports Windows 95 version 4.00.950b (OSR2.0/2.1) and newer, and all versions of Windows 98 4.10.xxxx. To determine the version of Windows on your computer, follow these steps: 1. Right click on the "My Computer" icon, and select "Properties," then the "General" tab. 2. The "General" page will reflect: Microsoft Windows 95 4.00.950 x or Microsoft Windows 98 4.10.xxxx If it is Windows 95 and the version is 4.00.950b or newer, then this SoftPaq is OK to use. TO VERIFY INSTALLATION OF THE SOFTWARE: 1. From the Windows 9X desktop, click on "My Computer," then "Control Panel," and then "System." 2. You should be in the "System Properties" window. Click on the "Device Manager" tab. From here, go down to "Display Adapter" and click. The driver associated with the display adapter should read "Intel® 810 Chipset Graphics Driver PV1.1" If this is not the case, the driver will need to be re-installed. To check the version of the driver, refer to the bottom section of the window. ENHANCEMENTS/FIXES: - PC99 Certified HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. Execute the downloaded file and follow the on-screen instructions. 3. After the files have been unpacked, you may delete the self-extracting file downloaded in step 1. 4. To install, read and follow the instructions provided with the software. 5. To create (optional) installation (or other deliverable) diskette(s) run MAKEDISK.BAT and follow the on-screen instructions. MAKEDISK.BAT is included only if installation diskette(s) creation is an option. 6. After the installation is completed, you may delete the directory created in step 2 if you wish. Copyright 1995-1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.