SOFTPAQ NUMBER:  SP11518
PART NUMBER:  166885-408
FILE NAME:  N/A
TITLE:  ROMPaq for Deskpro EP/SB Series (686T2 ROM)
VERSION:  686T2_080699 
LANGUAGE:  English

CATEGORY:  ROMPaqs 

DIVISIONS:  Desktops

PRODUCTS AFFECTED:  Compaq Deskpro EP and SB Series models 6350, 6400, 6400C,
                    6450, 6450+, 6500, P550, P600, P650, and P700 with a 686T2
                    Family ROM
             NOTE:  Run F10 Setup to determine the ROM Family and ROM date.

OPERATING SYSTEM:  N/A 

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  November 1, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP10855

DESCRIPTION:  This creates a ROMPaq firmware diskette that can be used to 
restore or upgrade the System ROM to the 08/06/99 version in Deskpro EP 
Series and SB Series models mentioned above, when they have a 686T2 Family ROM.  
The ROM Family and ROM date can be determined by running F10 Setup.  

A unique feature of the ROM is one that allows the user to select the language used in
F10 Setup.  The user may choose between Danish, Dutch, English, Finnish, French, German, 
Italian, Norwegian, Portuguese, Spanish, or Swedish.  Please note however that 
the user sees the chosen language only in F10 Setup not in the operating system.

This ROM version is compatible for use with Windows 2000 Beta.

Enhancements/Fixes:

- Features new patches for the Pentium II and Pentium III processors.
- Features a new F10-Setup option "WOL Boot Source" under "Advanced -> Power-On Self Test".
  This allows users to automatically boot to a remote server when the system recieves a
  "magic packet" wakeup signal.
- Features a three second improvement in POST time.
- Adds the ability for new PCI devices with large option ROM's to co-exist without conflict.
- Corrects a condition with the Adaptec AHA-3960D SCSI controller card that was causing the 
  system to hang at startup.
- Corrects a condition with the Microsoft Natural Elite keyboard that was causing the F11 
  and F12 keys to not work.
- Corrects a condition in F10 Setup that would not allow choosing the primary
  VGA display card if two VGA cards were installed in the system.
- Corrects a condition where the num-lock key was not being turned on at POST after being 
  enabled in F10 Setup.


HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded Spxxxx file 
to unpack the ROM image files.  Follow the on screen instructions and
you will be prompted to insert a formatted diskette in a drive to create
the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Keeping the newly created diskette in the A: drive, cycle 
system power to boot from the ROMPaq diskette.

6. Follow the on-screen instructions to select the 08/06/99 
Compaq System ROM or the Language Module option and upgrade the firmware.

Copyright 1998,1999 Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.