SOFTPAQ NUMBER: SP11024 PART NUMBER: 159517-001,159518-001,159521-001 FILE NAME: ROMPAQ.EXE TITLE: Tape Options ROMPaq VERSION: 1.30 Rev A LANGUAGE: English CATEGORY: ROMPaqs DIVISION: Systems PRODUCTS AFFECTED: Systems Updated: - ProSignia, ProSignia VS, ProSignia 200/300/500 - Proliant 800/850/1000/1500/1600/2000/2500/3000/4000/4500/5000/ 5500/6000/6500/7000, Rack-Mountable Proliant Servers or Systempro, Systempro/e, Systempro/LT, Systempro/XL Options Affected: - Compaq 4/8-GB DAT drive - Compaq 12/24-GB DAT drive - Compaq 35/70-GB DLT drive - Compaq 20/40-GB DLT library drive - Compaq 35/70-GB DLT library drive - Compaq DLT Library Model 2040-1 and 2040-2 controllers - Compaq DLT Library Model 3570-1 and 3570-2 controllers - TL891 Tape Libraries (see NOTE 2) Please stop all backup applications before updating a tape drive or tape library. Depending on your software application, you may need to unmount (unreserve) any tape cartridges in the library. See your computer operating system documentation or software application documentation for instructions on how to unmount tape cartridges. * NOTE:To obtain the latestest firmware for other Compaq tape devices, download SoftPaq SP8050 Option ROMPaq Firmware Upgrade utility from Compaq's Website. * NOTE 2: The tape drives inside the TL891 library do not come ready and do not report the correct firmware version when the servo FW is upgraded. After the firmware is upgraded, you must power-cycle the tape library (or use the reboot function on the front panel). OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 20 September, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 4.X SUPERSEDES: SP 9893 Tape Option ROMPAq v1.20 Rev. A DESCRIPTION: The Tape Options ROMPaq diskette allows a user to upgrade the ROM Firmware images on Compaq tape product Options. The Tape Options ROMPaq consists of three (3) diskettes: Disk 1 - Tape Options ROMpaq Firmware Upgrade Diskette for: - Compaq 4/8-GB DAT drive (C1533/C1539) - Compaq 4/8-GB DAT drive (SDT7000) - Compaq 12/24-GB DAT drive Disk 2 - Tape Options ROMpaq Firmware Upgrade Diskette for: - Compaq 20/40-GB DLT library drive - Compaq 35/70-GB DLT library drive - Compaq DLT Library Model 2040-1 and 2040-2 controllers - Compaq DLT Library Model 3570-1 and 3570-2 controllers Disk 3 - Tape Options ROMpaq Firmware Upgrade Diskette for: - Compaq TL891 Tape Library drive - Compaq 35/70-GB DLT drive Enhancements/Fixes: Upgraded Compaq 12/24-GB DDS3 DAT firmware to L708/4.22 Upgraded Compaq 4/8-GB DDS2 (C1533/C1539)DAT firmware to A708/611. Upgraded Compaq 4/8-GB DDS2 (SDT7000) to firmware 3.05 Firmware L708/4.22 for the Compaq 12/24-GB DAT drive and firmware A708/6.11 for the Compaq 4/8-GB DAT corrects the following condition: A loss of proper SCSI bus communications due to internal device reset that could occur if a "forced eject" is performed on the DAT drive. A forced eject can occur when the tape drive is busy and any of the following events occur: - The Eject button is pressed and then within 5 minutes is pressed momentarily two more times. - The Eject button is pressed momentarily three times in a 5-minute period. - The Eject button is pressed once for at least 5 seconds. Firmware 3.05 for the Compaq 4/8-GB DDS2 DAT (SDT7000) enhances the ability to read tapes created on other DDS2 tape drives. Upgraded Compaq 35/70-GB DLT drive to V85/2255 Upgraded Compaq 35/70-GB DLT library drive to V80/2150 Upgraded Compaq 20/40-GB DLT library drive to V127/D57F Upgraded Compaq 3570 Library controller to 4.05 Upgraded Compaq 2040 Library controller to 4.05 Upgraded Compaq TL891 library drives to V80 DGL and V80 CPA-2 The new firmware for the Compaq DLT products contain a number of performance enhancements and reduce the occurance of dropped leaders. TAPE DRIVES =========== This version of Tape Options RomPaq includes support for: - Compaq 4/8-GB DDS2 DAT drive (SDT7000) - Compaq 4/8-GB DDS2 DAT drive (C1533/1539) - Compaq 12/24-GB DDS3 DAT drive - Compaq 35/70-GB DLT drive - Compaq 35/70-GB DLT library drive - Compaq DLT Library Model 3570-1 and 3570-2 controllers - Compaq 20/40-GB DLT library drive - Compaq DLT Library Model 2040-1 and 2040-2 controllers To obtain the latestest firmware for other Compaq tape devices, download the latest Option ROMPaq Firmware Upgrade utility from Compaq's Website, SoftPaq SP8050. HOW TO USE: 1. Obtain three (3) formatted 1.44-MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert a formatted diskette in a drive to create the diskette. 4. After all diskettes have been created, you may delete the SoftPaq file downloaded in step 2. 5. The Tape Options ROMPaq diskettes are self-booting diskettes. Place the ROMPaq diskette into your drive A: diskette drive and power cycle your system to begin updating the appropriate components. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.