SOFTPAQ NUMBER: SP10897 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Ethernet/Fast Ethernet Network Drivers for SCO OpenServer Release 5.x VERSION: 5.02.a for n100c, 1.01 for n1000 LANGUAGE: English CATEGORY: Drivers DIVISIONS: Comm-Network PRODUCTS AFFECTED: Compaq server products using Intel-based NICs OPERATING SYSTEM: SCO OpenServer Release 5.05 Enterprise SCO OpenServer Release 5.05 Host SCO OpenServer Release 5.04 Enterprise SCO OpenServer Release 5.04 Host SCO OpenServer Release 5.02 Enterprise SCO OpenServer Release 5.02 Host SCO OpenServer Release 5.0 Enterprise SCO OpenServer Release 5.0 Host SCO Internet FastStart SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: June 24, 1999 SOFTPAQ UTILITY VERSION: 2.X ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: N/A DESCRIPTION: Creates two diskettes to install the following drivers: - Compaq n100c Intel-based NIC driver, supports 10/100 NICs - Compaq n1000 Intel-based NIC driver, supports GIG NICs IMPORTANT: Do not use or run Compaq Insight Management Agents (CIM) with this SoftPaq! Undesirable results may occur! Remove any network configuration that is present on these NICs using NETCONFIG prior to this installation. HOW TO USE: 1. Obtain two (2) 1.44-MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP10897.exe. 3. From that drive and directory, execute the SoftPaq file: SP10897 [ENTER] The following files should be created: QRST5.EXE CPQNICUS._01 CPQNICUS._02 README.TXT 4. After the files are created, you may delete the downloaded file SP10897.exe if you wish. 5. To create the diskettes, run QRST5.EXE. 6. Run CUSTOM.EXE to install the drivers. Follow the SCO release notes and the manual on software installation. Copyright 1989-1999, Compaq Computer Corporation. All rights reserved. Copyright 1991-1999, The Santa Cruz Operation, All rights reserved Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.