SOFTPAQ NUMBER: SP10715 PART NUMBER: 275289-479, 275290-479, 275291-479, 275292-479 FILE NAME: N/A TITLE: Compaq System Configuration Utility VERSION: 2.49 Rev A LANGUAGE: Italian CATEGORY: Diagnostics-Setup DIVISIONS: Systems PRODUCTS AFFECTED: ProSignia, ProSignia VS, ProSignia 200 Family, ProSignia 300, ProSignia 500, ProSignia 740, Systempro, Systempro/E, Systempro/LT, Systempro/XL, Deskpro/L Family, Deskpro/M Family, Deskpro/XL Family, Portable 486, ProLiant 800, ProLiant 850R, ProLiant 1000, ProLiant 1200, ProLiant 1500, ProLiant 1600, ProLiant 1850R, ProLiant 2500, ProLiant 3000, ProLiant 2000/4000, ProLiant 4500, ProLiant 5000, ProLiant 5500, ProLiant 6000, ProLiant 6400R, ProLiant 6500, ProLiant 7000, ProLiant 8000, ProLiant 8500, ProLiant CL1850, ProLiant ML370, ProLiant ML530, ProLiant DL380, ProLiant Servers OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A PREREQUISTES: N/A EFFECTIVE DATE: 14-January-2000 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: SP10698 DESCRIPTION: Creates the four System Configuration For Compaq EISA and EISA/PCI Products diskettes, which support all currently shipping Systems Division server products. It is installed on the System Partition for those systems that support it and have hard drives. It is shipped as diskette(s) on all other products. New features: 1. Added support for the Compaq ProLiant ML 370 Server. 2. Added support for the Compaq ProLiant ML 530 Server. 3. Added support for the Compaq ProLiant DL 380 Server. 4. Added support for the Compaq Remote Insight Lights-Out Edition. 5. Added support for the Compaq StorageWorks 64-Bit/66-Mhz Fibre Host Bus Adapter. 6. Added support for the Compaq Smart Array 431 Controller. Problems fixed: None. HOW TO USE: 1. Obtain four (4) formatted 1.44-MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. The following files will be created: qrst5.exe 275289IT._01 275289IT._02 275289IT._03 275289IT._04 readme.1st 4. Run qrst5.exe to create the diskettes. 5. After the diskettes have been created, you may delete the SoftPaq file downloaded in step 2 and all files generated if you wish. 6. To run the Compaq System Configuration Utility, power down your computer, place the Compaq System Configuration Utility diskette 1 in Drive A:, and power up your computer. Copyright 1995,2000 Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies