SOFTPAQ NUMBER: SP10859
PART NUMBER:  N/A
FILE NAME:  686T3.CAB
TITLE:  ROM Image for Deskpro EN Series Remote ROM Flash (686T3 ROM)
VERSION:  686T3_070399 
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Desktops

PRODUCTS AFFECTED:  Compaq Deskpro EN Series models 6266, 6300, 6300A, 
                    6300C, 6333, 6333C, 6350, 6400, 6400C, 6450, 6450+, 
                    6500 and P550 with a 686T3 Family ROM
		 NOTE:  Run F10 Setup to determine the ROM Family and ROM date.

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  July 27, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.X

SUPERSEDES:  SP9430

PREREQUISITE:  Remote Management Setup

DESCRIPTION:  Creates cabinet files that contain a binary image for the 07/03/99
version System ROM and Language Module options for Deskpro EN Series models 
with a 686T3 Family ROM.  The ROM Family and ROM date can be determined by running 
F10 Setup.  

This ROM version is recommended for use with Windows 98.

This ROM includes a ROM-based F10 Setup.  A Language Module option allows the user to 
select the language used in F10 Setup: Danish, Dutch, English, Finnish, French, German, 
Italian, Norwegian, Portuguese, Spanish, or Swedish.  

Enhancements/Fixes:

- Features new patches for the Pentium II and Pentium III processors.
- Corrects a timing problem when printing on certain high speed printers that have 
  small buffers.
- Corrects a potential extended memory conflict with option cards featuring bridges.
- Corrects a potential slow boot issue with SCO UNIX version 5.0.5.
- Corrects a condition with the Syquest SyJet 1.5GB IDE removable media device not 
  being seen properly.
- Corrects a condition where the computer may hang when using the "ON Command" remote
  software.
- Corrects a slow boot issue with the Nanao USB monitor/hub.
- Added an AGP disable on warm boots for some cards that required a reset.


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
This creates the cab folder containing the ROM image and language files.

3. After the file has been created, you may delete the  
self-extracting file downloaded in step 1.

4. Refer to the Remote Management Setup or SSM documentation for 
instructions on creating a Remote ROM Flash job to flash the ROM 
on target PCs on the network.

Copyright 1998,1999 Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.