SOFTPAQ NUMBER: SP10854 PART NUMBER: N/A FILE NAME: 686W5.CAB TITLE: Professional Workstation AP400/AP500 ROM Image for Remote ROM Flash VERSION: 686W5_070299 Rev A LANGUAGE: English CATEGORY: ROMPaqs DIVISIONS: Workstations PRODUCTS AFFECTED: Compaq Professional Workstation AP400 and Compaq Professional Workstation AP500 OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: July 27, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 4.x PREREQUISITE: Remote Management Setup or System Software Manager (SSM) SUPERSEDES: SP10840 DESCRIPTION: Creates a cabinet file that contains a binary image for the 07/02/99 System ROM in the Professional Workstation AP400 or AP500. The CAB file is used by Remote Management Setup or System Software Manager (SSM) to flash the System ROM on target Workstations on a network. Enhancements/Fixes: - Features new microcode patches for the Pentium III processors. - Corrects a condition that was causing the system to hang at POST if an MKE DVD drive was installed. - Adds support for System Software Manager (SSM) HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable. 2. Execute the downloaded file and follow the on-screen instructions. The name of the extracted file is 686W5.CAB. 3. After the CAB file has been created, you may delete the self-extracting file downloaded in step 1. 4. Refer to the Remote Management Setup documentation or System Software Manager (SSM) documentation for instructions on creating a Remote ROM Flash job to flash the ROM on target Workstations on the network. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.