SOFTPAQ NUMBER: SP10193 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Microcom 420 56K PC Card Fax Modem Firmware Update VERSION: 2.200R.b LANGUAGE: English CATEGORY: ROMPaqs DIVISIONS: CPCG - Displays & Peripherals PRODUCTS AFFECTED: Compaq Microcom 420 56K PC Card Fax Modem OPERATING SYSTEM: Microsoft Windows 98, Windows 95, Windows 3.1, or Windows NT 4.0 SYSTEM CONFIGURATION: - IBM Compatible 486DX2/66 or greater with 4-MB system RAM; - at least 5MB of free hard disk space; - a Compaq Microcom 420 56K PC Card Fax Modem; - a Compaq Microcom 420 56K PC Card Fax Modem Installation Software Diskette, Version 1.20 or greater (available as SoftPaq SP10052 on the Compaq website). EFFECTIVE DATE: August 9, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.x PREREQUISITES: To complete the update to the ITU V.90 Standard and for full support of the modem in additional countries, you must also have the Compaq Microcom 56K PC Card Fax Modem Installation Software Diskette, Version 1.20 or later (available as SoftPaq SP10052 on the Compaq website). SUPERSEDES: SP8969 DESCRIPTION: Copies and expands files necessary for the V.90 Firmware Update of Compaq Microcom 420 56K PC Card Fax Modems. By default, the files are copied into the directory where the SoftPaq is located; however, the user may choose to enter a different path. ENHANCEMENTS/FIXES: - Adds country support for Spain, S. Africa, Portugal, Poland, Czech Republic, Ireland, Iceland, Greece, Israel and Turkey (ONLY when used with the Country Select Utility included on the Compaq Microcom 56K PC Card Fax Modem Installation Software Diskette, Version 1.20 or later, available as SoftPaq SP10052). - Fixes a no compression/error correction problem when calling servers that answer with the cellular access bit set in V.8. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to confirm (or change) the name and location of the directory, into which the files contained in the Softpaq will be expanded. 3. After expansion, you may delete the SoftPaq file downloaded in step 1 above. 4. Use a text editor to read and print the README.TXT file, which can be found in the directory where the SoftPaq files were expanded. This file contains detailed instructions on how to update the modem firmware. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.