SOFTPAQ NUMBER: SP10127 PART NUMBER: 276849-004, 276850-004 TITLE: Deskpro ATI Rage Video Drivers for Windows VERSION: 5.26-C9S LANGUAGE: English (US) CATEGORY: Driver DIVISIONS: Commercial Desktops PRODUCTS AFFECTED: "Deskpro EN",SFF 6400,SFF 6350,SFF 6333,SFF 6300C,SFF 6300 "Deskpro EN",6450,6400,6350,6333C,6333,6300C,6300A,6300,6266 "Deskpro EP",6450,6400,6350,6300A,6300,6266C,6266 "Deskpro SB",6400,6350,6300,6266 "Deskpro EN",Net PC 6400,Net PC 6300 "Deskpro EP",6333C,6333 "Deskpro SB",6333 OPERATING SYSTEM: Microsoft Windows 95 Microsoft Windows 98 SYSTEM CONFIGURATION: ATI 3D Rage IIC ATI 3D Rage Pro 1X ATI 3D Rage Pro 2X ATI 3D RagePro Turbo 2X PREREQUISITES: To obtain 132 column support (Modes 109, 10A, 10B, 10C) you must upgrade the video ROM on a Rage Pro Turbo Graphics Controller with upgrade software from one of the following SoftPaqs: SP6868 for the Rage Pro Turbo 1X SP6869 for the Rage Pro Turbo 2X EFFECTIVE DATE: May 5, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 4.0 SUPERSEDES: SP8263 DESCRIPTION: This software contains the files necessary to install the Windows 95/98 video driver for the ATI Rage Pro Turbo 1X, 2X, or Rage IIC Graphics Controllers. Optionally creates two installation diskettes. To determine if your model has one of these controllers, go to the Control Panel, then select the System icon, the Device Manager tab, and the Display adapters icon. Enhancements/Fixes: - Adds support for System Software Manager HOW TO USE: 1. Download the Softpaq to a directory on your hard drive. The file downloaded is a self-extracting executable with the file name based on the Softpaq Number above. 2. From the download directory, execute the SoftPaq. When executed with no parameters, files are extracted into new folders that are created in the current directory. To create the folders in a different directory, specify the complete path of the directory as a parameter when executing the SoftPaq: SPXXXX Enter "Y" to confirm and folders are created in the download directory or the directory specified. 3. After the folders disk_01 and disk_02 a have been created, you may delete the self-exctracting file downloaded in step 1. 4. The driver may be installed directly from the folders in the download directory, or two driver installation diskettes can be created. To create installation diskettes, run MAKEDISK.BAT. To read detailed installation and usage instructions, refer to README.TXT. 5. To install the driver, run SETUP.EXE from the first installation diskette or from directory disk_01 if installing from the hard drive. For example, select Start, Run, then enter: \disk_01\setup where is the drive and directory chosen in step 2 6. Follow the on-screen instructions to complete the installation. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.