SOFTPAQ NUMBER: SP10062 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Microcom 550 V.90 Firmware Upgrade Utility for Windows 95/98 VERSION: 2.30 LANGUAGE: US English CATEGORY: Drivers DIVISIONS: Comm-Network PRODUCTS AFFECTED: Compaq Microcom 550 56K Modem + 10/100 Ethernet PC Card OPERATING SYSTEM: Microsoft Windows 95, Microsoft Windows 98 SYSTEM CONFIGURATION: IBM Compatible 486DX2/66 or greater with 4-MB system RAM, at least 1MB of free hard disk space, and a Compaq Microcom 550 56K Modem + 10/100 Ethernet PC Card PREREQUISITES: N/A EFFECTIVE DATE: April 25, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.x SUPERSEDES: SP9410 DESCRIPTION: Unpacks the files needed to run the firmware upgrade utility for the Compaq Microcom 550 56K Modem + 10/100 Ethernet PC Card. This is only for the operating systems listed above. Instructions for the use of the firmware upgrade are contained in the file README.TXT in the folder to which the SoftPaq is unpacked. ENHANCEMENTS/FIXES: - Support for V.90 firmware - Improved connectivity HOW TO USE: 1. Download the SoftPaq to a folder on your hard drive and change to that folder. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 2. From that drive and folder, execute the downloaded file and follow the on-screen instructions. You will be prompted to confirm (or change) the name and location of the folder into which the files contained in the Softpaq will be unpacked. 3. After the files are unpacked, you may delete the SoftPaq file downloaded in step 1. 4. Use a text editor to read and print the file Readme.txt in the folder to which you expanded the SoftPaq files for instructions on the use of the firmware upgrade utility. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.