SOFTPAQ NUMBER: SP10350 PART NUMBER: N/A FILE NAME: N/A TITLE: Armada Specific Models System Enhancements Disk for Windows 98 VERSION: 1.10 Rev B LANGUAGE: US English CATEGORY: Support Software and Driver Bundles DIVISIONS: Portables PRODUCTS AFFECTED: Compaq Armada 7400 6266/T/4000/D/0/1 Compaq Armada 7400 6266/T/4000/D/0/3 Compaq Armada 7400 6300/T/6000/D/M/1 Compaq Armada 7400 6300/T/6000/D/0/1 Compaq Armada 7400 6300/T/6000/D/0/3 Compaq Armada 7400 6333/T/6.4/D/M/1 Compaq Armada 7400 6333/T/6.4/D/0/1 Compaq Armada 7400 6333/T/6.4/D/M/3 Compaq Armada 7400 6333/T/6.4/D/0/3 Compaq Armada 7400 6366/T/10.0/V/M/1 Compaq Armada 7400 6366/T/10.0/V/M/3 Compaq Armada 7400 6366/T/10.0/V/0/1 Compaq Armada 7400 6366/T/10.0/V/0/3 Compaq Armada 7400 6366/T14/10.0/V/M/1 Compaq Armada 7400 6366/T14/10.0/V/0/1 Compaq Armada 7400 6366/T14/10.0/V/M/3 Compaq Armada 7400 6366/T14/10.0/V/0/3 Compaq Armada 7800 6366/T/14.0/V/M/1 Compaq Armada 7800 6366/T/14.0/V/0/1 Compaq Armada 7800 6366/T/14.0/V/M/3 Compaq Armada 7800 6366/T/14.0/V/0/3 Compaq Armada 7800 6266/T/5000/D/M/1 Compaq Armada 7800 6266/T/5000/D/0/1 Compaq Armada 7800 6266/T/5000/D/0/3 Compaq Armada 7800 6266/T/8000/D/M/1 Compaq Armada 7800 6266/T/8000/D/0/1 Compaq Armada 7800 6266/T/8000/D/0/3 Compaq Armada 7800 6300/T/8000/V/M/1 Compaq Armada 7800 6300/T/8000/V/0/1 Compaq Armada 7800 6300/T/8000/V/0/3 Compaq Armada 7800 6400/T14/14.0/V/M/1 Compaq Armada 7800 6400/T14/14.0/V/0/1 Compaq Armada 7800 6400/T14/14.0/V/M/3 Compaq Armada 7800 6400/T14/14.0/V/0/3 OPERATING SYSTEM: Microsoft Windows 98 SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: 10 Jun 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 4.1 SUPERSEDES: SP9188 DESCRIPTION: Unpacks the files needed to install the Armada Specific Models System Enhancements Disk for Windows 98 for the models listed above in PRODUCTS AFFECTED. Optionally creates an installation diskette. IMPORTANT: System Enhancement Disk (SED) cannot be re-installed on top of existing SED. Enhancements/Fixes: - Resolved PCI/IDE controller hang after using PCMCIA card then creating a dock profile. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. Execute the downloaded file and follow the on-screen instructions. Entering "Y" to confirm the unpacking of files creates a new directory folder in the download directory. All files are unpacked into this newly created directory. To create the one optional installation diskette, run MAKEDISK.BAT and follow on-screen instructions. 3. Execute the downloaded file and follow the on-screen instructions. Entering "Y" to confirm the unpacking of files creates a new directory folder in the download directory. All files are unpacked into this newly created directory. 4. To install, run SETUP.EXE. For example, enter: \SETUP where is the drive and directory created in step 2 - or - a diskette drive letter if using the optional installation diskette Follow the on-screen instructions. 5. After the installation is completed, you may delete the directory created in step 2 if you wish. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies