FILE NAME: unmflash-v1.08-1a.src.rpm

TITLE:     HP NC510x PCIe 10 Gigabit NIC Firmware Upgrade Utility for Linux

VERSION:   v1.08

RELEASE:   1a

LANGUAGE:  English

CATEGORY:  Software Solutions

DIVISIONS: Enterprise and Mainstream Servers

PRODUCTS AFFECTED:
      HP NC510F PCIe 10 Gigabit Server Adapter
                               
OPERATING SYSTEM:
      Red Hat Enterprise Linux 4 AS/ES for AMD64/EM64T
      Red Hat Enterprise Linux 4 AS/ES for x86
      SUSE LINUX Enterprise Server 10 for AMD64/EM64T
      SUSE LINUX Enterprise Server 10 for x86
      SUSE LINUX Enterprise Server 9 for AMD64/EM64T
      SUSE LINUX Enterprise Server 9 for x86

PREREQUISITES:  ProLiant server supporting one of the above operating systems
                2GB RAM minimum
                PCIe Slot

EFFECTIVE DATE: January 16, 2007

SUPERSEDES:     N/A 

DESCRIPTION:    This RPM contains the HP Tested and Approved Linux
                Universal Network Machines Flash Utility. It can used to 
                upgrade the firmware of Server Adapters mentioned in the
                PRODUCTS AFFECTED section to 2.3.60 level code.

ENHANCEMENTS/FIXES:
   - NONE.
   
Table of Contents
=================
  Introduction
  Packaging
  Installing the RPM Package
  Upgrading the Firmware
  Unstalling the RPM Package

Introduction
============
This file describes the installation and use of the 
10 Gigabit NIC Firmware Upgrade Utility needed to upgrade
the Server Adapters in the PRODUCTS AFFECTED section. 

Packaging
=========
The 'unmflash' Utility is released in a source RPM format. The file name for
the package is unmflash-<version>.src.rpm.

Installing the RPM Package
=============================
1. Install the unmflash source rpm.
   # rpm -ivh unmflash-<version>.src.rpm

2. Build the binary RPM for the unmflash utility.

   Red Hat Installation:
   # cd /usr/src/redhat
   # rpmbuild -bb SPECS/unmflash_<version>.spec

   SLES Installations:
   # cd /usr/src/packages
   # rpmbuild -bb SPECS/unmflash_<version>.spec

   If an old version of the package exists, the RPM package should be
   removed.
   # rpm -e unmflash

3. Install the new RPM package.
   # rpm -ivh RPMS/<arch>/unmflash-<version>.<arch>.rpm


Upgrading the Firmware
=============================

Note: Before proceding with the firmware upgradation the
      unm_nic driver has to be loaded into the system.

1. Identify the version of the card 
        a. Check if it is a HP NC510F -001 board

2. Install the '10 Gigabit Network Driver'(unm_nic >= 2.3.58).
   Refer to "unm_nic-<version>.src.txt" for more detailed information.

3. Upgrade firmware 
        a.change to the directory to which files were installed 
           # cd /usr/local/unmflash
	    
        b. 
           #./nxupdate_to_001

4. Verify firmware and bios version (firmware 2.3.60 and BIOS 1.0.0)
        a. 
           #./unmflash -i eth<n> --info

5. Reboot the system to use the new firmware


Uninstalling the RPM Package
=============================

The following command will uninstall the unmflash RPM.
     # rpm -e unmflash

(C) Copyright 2002, 2003 - 2007  Hewlett-Packard Development Company, L.P.
Product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies