SOFTPAQ NUMBER: N/A PART NUMBER: N/A FILE NAME: mptlinux-2.06.44.02-1.rhel3.i686.dd.gz TITLE: Driver diskette for HP U320 SCSI Adapter and SAS HBA with RAID (x86) for Red Hat Enterprise Linux 3 (x86) VERSION: 2.06.44.02-1 LANGUAGE: English CATEGORY: Driver Diskettes DIVISION: N/A OPERATING SYSTEM: Red Hat Enterprise Linux 3 (x86) EFFECTIVE DATE: Sep 25,2006 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: N/A SUPERSEDES: N/A DESCRIPTION: This driver diskette image provides the binary driver module pre-built for Red Hat Enterprise Linux 3 to enable the HP ProLiant 64-bit/133-MHz Dual Channel Ultra320 SCSI HBA and HP U320 64-Bit Single Channel SCSI G2 HBA, HP U320 64-Bit Single Channel SCSI HBA, HP 8 Internal Port SAS/SATA HBA with RAID and HP 4 Internal Port SAS HBA with RAID. Using this driver diskette at Red Hat Enterprise Linux 3 installation time allows the most up-to-date driver version included in the diskette to be used, rather than the default driver version contained in the Red Hat Enterprise Linux 3 installation CD. FIXES - None ENHANCEMENTS - Added support for SAS Tapes The kernels of Red Hat Enterprise Linux 3 supported by this driver diskette are: 2.4.21-27.EL - Red Hat Enterprise Linux 3 Update 4 (x86) 2.4.21-32.EL - Red Hat Enterprise Linux 3 Update 5 (x86) 2.4.21-37.EL - Red Hat Enterprise Linux 3 Update 6 (x86) 2.4.21-40.EL - Red Hat Enterprise Linux 3 Update 7 (x86) INSTALLATION To install Linux using this "ProLiant Red Hat Enterprise Linux 3" Driver Diskette, boot your Linux machine with your Red Hat Enterprise Linux 3 CD1 in your CD-ROM Drive. A menu will be displayed, prompting for your input. Type the following line of code to inform the operating system of the diskette: # linux dd Red Hat Enterprise Linux 3 will prompt for the Updates Diskette and the ProLiant Red Hat Enterprise Linux 3 Driver Diskette during the installation procedure. CAUTION: If ProLiant Support Pack version 7.40 or older is installed, please install mptlinux-2.06.44.02-1.rhel3.i686.dd.gz prior to rebooting the system. Note: If HP System Insight Manager support is required, please install the mptlinux-2.06.44.02-1.rhel3.i686.dd.gz after the OS has completed its installation process and is successfully booting. NOTES CREATING A DRIVER DISKETTE There are two methods to create the Installation Diskette: MAKING A DISKETTE UNDER MS-DOS: 1) Save the "mptlinux-2.06.44.02-1.rhel3.i686.dd.gz" file into a temporary directory. Use WINZIP to extract "mptlinux-2.06.44.02-1.rhel3.i686.dd" from this file into the same directory. Please ensure that "mptlinux-2.06.44.02-1.rhel3.i686.dd" is a DOS 8.3 name. 2) Use the "rawrite" utility which is included on the Red Hat Enterprise Linux 3 CD in the "dosutil" directory. 3) Label a blank, formatted 3.5-inch diskette as "ProLiant Red Hat Enterprise Linux 3 Driver Diskette". Next, insert the diskette in the diskette drive. Then, use the following commands (assuming your ProLiant Disk Image is at the location c: and your CD-ROM is drive d:) C:\> d:\dosutils\rawrite Enter disk image source file name: mptlinux-2.06.44.02-1.rhel3.i686.dd Enter target diskette drive: a: Please insert a formatted diskette into drive A: and press --ENTER-- : Enter MAKING A DISKETTE UNDER A LINUX-LIKE OS: 1) Save the "mptlinux-2.06.44.02-1.rhel3.i686.dd.gz" file into a temporary directory. Use GUNZIP to extract "mptlinux-2.06.44.02-1.rhel3.i686.dd" from this file into the same directory 2) To make a diskette under Linux (or any other Linux-like operating system), you must have permission to write to the device representing a 3.5-inch diskette drive (known as /dev/fd0 under Linux) 3) First, label a blank, formatted diskette appropriately (ProLiant Red Hat Enterprise Linux 3 Driver Diskette). Insert the diskette into the floppy drive, but DO NOT issue the mount command: # dd if=mptlinux-2.06.44.02-1.rhel3.i686.dd of=/dev/fd0 bs=1440k 4) This command creates a diskette containing the image of the input file (if=mptlinux-2.06.44.02-1.rhel3.i686.dd) to an output file (of=/dev/fd0) using the diskette size of 1440k (1.44MB). To make another diskette label that diskette, and run "dd" again, specifying the correct input file. Supported Hardware ------------------ Servers ProLiant BL35p ProLiant DL140 G2 ProLiant DL140 G3 ProLiant DL145 G2 ProLiant DL145 G3 ProLiant DL320 G3 ProLiant DL320 G4 ProLiant DL320 G5 ProLiant DL360 G3 ProLiant DL360 G4 ProLiant DL360 G5 ProLiant DL380 G3 ProLiant DL380 G4 ProLiant DL380 G5 ProLiant DL585 ProLiant ML110 ProLiant ML110 G2 ProLiant ML110 G3 ProLiant ML110 G4 ProLiant ML150 G2 ProLiant ML150 G3 ProLiant ML310 G2 ProLiant ML310 G3 ProLiant ML310 G4 ProLiant ML330 G2 ProLiant ML330 G3 ProLiant ML350 G3 ProLiant ML350 G4p ProLiant ML350 G4 ProLiant ML350 G5 ProLiant ML370 G3 ProLiant ML370 G4 ProLiant ML370 G5 ProLiant ML570 G3 ProLiant ML570 G4 ProLiant ML750 Storage HP 8 Internal Port SAS/SATA HBA with RAID HP 64-Bit/133-MHz Single Channel Ultra 320 SCSI HBA G2 HP 64-Bit/133-MHz Dual Channel Ultra 320 SCSI HBA MD5SUM: aaaca679ddf209d7af60a487cc3be331 Customer Service ---------------- For support, please send email to contact.hp@hp.com. Copyright 2002-2006 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.