SOFTPAQ NUMBER: N/A

PART NUMBER: N/A

FILE NAME: mptlinux-2.05.16.01-12.ul10.i586.rpm

TITLE: HP ProLiant 64-Bit/133-MHz Ultra320 Adapter (x86 & AMD32) Driver for SUSE LINUX Enterprise Server 8 (x86)

VERSION: 2.05.16.01-12

LANGUAGE: English

CATEGORY: Driver - Storage Controllers

DIVISION: N/A

OPERATING SYSTEM: United Linux 1.0/ SUSE LINUX Enterprise Server 8 (x86)

PREREQUISITES: N/A

EFFECTIVE DATE: Mar 24, 2005

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: N/A

SUPERSEDES: N/A

SUPPORTED DEVICES / SERVERS
DL760 G2
DL760
DL740
DL580 G2
DL580
DL380 G4
DL380 G3
DL380 G2
DL360 G4/G4p
DL360 G3
DL360 G2
DL320 G3
DL320 G2
ML750
ML570 G3
ML570 G2
ML530 G2
ML530
ML370 G4
ML370 G3
ML370 G2
ML350 G4
ML350 G3
ML350 G2
ML330 G3
ML330 G2
ML310 G2
ML310

HP ProLiant 64-Bit/133-MHz Dual Channel Ultra320 Adapter
HP ProLiant 64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
HP ProLiant 64-Bit/133-MHz Single Channel Ultra320 SCSI HBA

DESCRIPTION:

This binary RPM provides x86 and AMD32 support for HP ProLiant 64-Bit/133-MHz Ultra320 SCSI HBA for
SUSE LINUX Enterprise Server 8 (x86).

Supported kernels:
2.4.21-138 - SUSE LINUX Enterprise Server 8 SP3 (x86)
2.4.21-169
2.4.21-190
2.4.21-196
2.4.21-198
2.4.21-215
2.4.21-226
2.4.21-238
2.4.21-241

FIXES

1) None

ENHANCEMENTS

1) Added new errata kernel support.

Please read this section before proceeding. 

This RPM will install binary drivers that will only work with the default 
United Linux kernels, and the configurations that it has been built for. Earlier 
or later versions of United Linux are not supported. Special actions are required 
if you have modified the default kernel configuration that SuSE ships 
for their United Linux product. If you have modified the default kernel 
configuration you will need to rebuild the kernel with the updated sources located
in /usr/src/packages/SOURCES.

This driver RPM will not install if the loopback device is not configured 
but the initrd image is requested since the loopback device is required 
to create the initrd image. 

INSTALLATION

Login as the system administrator (root), download the RPM to a directory
on your hard drive and change to that directory.

To install the driver type:
  # rpm -Uhv --replacefiles mptlinux-<version>-<release>.<distro>.<arch>.rpm

If an error occurs during installation, DO NOT reboot your system as the driver
may not have been loaded properly and the system may be in an unusable state.
You should remove the rpm immediately.

Note:  If you are installing another rpm which modifies the boot loader
       (i.e. HP cciss rpm) please install the mptlinux rpm first, and then
       install the other rpm.  You may then boot the entry added by the
       other rpm rather than the original OS entry as would normally be
       required (see above).

Setup is now complete.  Please REBOOT you computer NOW!!

To remove the rpm use the following command:
  # rpm -e mptlinux-<version>-<release>

To load the module use the following commands:
  # insmod mptbase
  # insmod mptscsih

  if needed:
  # insmod mptlan
  # insmod mptctl



NOTES

Feedback 
-------- 
To provide kernel/driver development feedback send email to
iss_storagedev@hp.com

Customer Service 
---------------- 
For support please send email to contact.hp@hp.com. 

Copyright 2002 - 2005 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.