FILE NAME: cpqacuxe-1.20-3.0.i386.rpm
TITLE: Compaq Array Configuration Utility XE for Red Hat Linux
VERSION: 1.20.3.0
LANGUAGE: English
CATEGORY: Storage
DIVISIONS: none
PRODUCTS AFFECTED: See below
OPERATING SYSTEM: Red Hat 7.1
SYSTEM CONFIGURATION: 
  Supported Client Side Browsers
    Netscape Navigator 4.76 on Linux
    Microsoft Internet Explorer 5.0 or above on Microsoft Windows NT 4.0/Windows 2000.
  Supported Controllers:
    Compaq Smart Array 5300 Controller
    Compaq Smart Array 532 Controller
    Compaq Smart Array 5i Controller
    Integrated Smart Array Controller
    Compaq Smart Array 4200 Controller
    Compaq Smart Array 4250ES Controller
    Compaq Smart Array 431 Controller
    Compaq Smart Array 3200 Controller

PREREQUISITES: none
EFFECTIVE DATE: 8/15/01 
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SUPERSEDES: none
DESCRIPTION: Online array configuration utility for Compaq Smart Array controllers for Red Hat 7.1 Linux.
Enhancements/Fixes: none
HOW TO USE: 

  Installation:

    ACU-XE is distributed using Red Hat Package Manager (RPM) packages. 
    Use "rpm -i <file name>" to install the server.
    Please type "man rpm" for other details regarding RPM.
    The software resides in /usr/lib, /opt/compaq/cpqacuxe and the executable 
    name is cpqacuxe which is located in /usr/sbin.

  Run the ACU-XE server:
  
    Make sure that you have gone through the following checklist:
    . Change the ACU-XE administrator password to something other than
      the default. - Refer to step 3 in "Run the ACU-XE client" section.
    . Only run ACU-XE on servers that are on a local intranet
      or a secure network.
    . Secure the management port (port 2301) on your network.
    . You run cpqacuxe as root.

    To start the server:
    If /usr/sbin is already added in your path, just type:
    "cpqacuxe" for local access only or 
    "cpqacuxe -R" for remote access.
    More options can be found by "cpqacuxe --help".

  Run the ACU-XE client:
    1. Open your browser (Netscape Navigator 4.76 on Linux or 
    Internet Explorer 5.0 or above on Microsoft Windows NT 4.0/Windows 2000.

    If remote access is enabled:
    2a. Type "http://SERVERNAME:2301" into the url field. The servername should 
       be the IP address or server name of the host on which the ACU-XE server
       is running.

    If remote access is disabled:
    2b. Type "http://127.0.0.1:2301" into the url field on the machine on which
       the ACU-XE server is running.

    3. On the Device Home Page that opens in the browser, click the anonymous 
       link near the top of the screen. You should now see a login screen.
    4. Enter your username and password. For first-time use, these will both 
       be administrator. Change the password to something else if you have not
       done that.
       NOTE:  You can change the username or password by clicking the 
       appropriate link on this screen. The choice of username is limited 
       to user, guest, or administrator. When you have successfully logged in, 
       you should see the Device Home Page again.
    5. Click the ACU-XE button near the bottom of the screen.

  Exiting ACU-XE:
    1. To exit the ACU-XE client, close the browser by clicking on the Exit link.
    2. To exit the ACU-XE server, type "cpqacuxe -stop".

Copyright 2001, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.