SOFTPAQ NUMBER: N/A PART NUMBER: N/A FILE NAME: cpq_cciss-2.4.52-11.ul10.amd64.dd.gz TITLE: Driver diskette image for ProLiant Linux driver (amd64) for Smart Array 6i, 64xx, 5i, 53xx Series controllers for UnitedLinux 1.0 (AMD64) VERSION: 2.4.52-11 LANGUAGE: English CATEGORY: Driver Diskettes DIVISION: N/A OPERATING SYSTEM: UnitedLinux 1.0 EFFECTIVE DATE: Dec 21,2004 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: N/A SUPERSEDES: N/A DESCRIPTION: This driver diskette image provides the binary driver module pre-built for United Linux 1.0 to enable ProLiant Smart Array 6x and 5x Series controllers. Using this driver diskette at United Linux 1.0 installation time allows the most up-to-date driver version included in the diskette to be used, rather than the default driver version contained in the United Linux 1.0 installation CD. FIXES ENHANCEMENTS The kernels of UnitedLinux 1.0 supported by this driver diskette are: 2.4.21-143 - United Linux 1.0 SP 3 (AMD64) SUPPORTED DEVICES AND FEATURES MSA 500 G2 MSA 20 Smart Array 6i Controller Smart Array 6400 Controller Smart Array 6400 EM Controller Smart Array 641 Controller Smart Array 642 Controller Smart Array 5312 Controller Smart Array 5304 Controller Smart Array 5302 Controller Smart Array 532 Controller Smart Array 5i Plus Controller Smart Array 5i Controller SYSTEMS SUPPORTED family models ------ ------ Smart Array Controller 6400, 6402, 6404, 641, 642, 5i, 5312, 5304, 5300, 532, CLUSTER STORAGE, MSA500, 6i, MSA 20 StorageWorks Enclosure All Models ProLiant Storage System All Models ProLiant DL585 (1.8GHz+) INSTALLATION To install Linux using this "ProLiant United Linux 1.0" Driver Diskette, boot your Linux machine with your United Linux 1.0 CD1 in your CD-ROM Drive. The installation workflow performs the following steps: o syslinux boots o the user presses "ALT" (optional, if medium change is necessary) o syslinux prompts the user for an "update medium" (e.g. floppy or CD-ROM) o the user inserts the medium and presses "Enter" o syslinux boots into the "update" mode of linuxrc o linuxrc mounts the medium o linuxrc copies all files from /linux/suse/-/install into a directory "install" in a RAM disk mounted below /update (max. 8MB), all files will be flagged as "executable" o linuxrc loads all driver modules below /linux/suse/-/modules by first unloading all modules with the same name and loading the new modules from this directory (in the order the modules have been installed on the medium! Take care of this if your driver modules depend on other modules being loaded first) o linuxrc unmounts the update medium o now linuxrc kicks back and starts YaST1 or YaST2 to do the installation o before starting the installation of packages, YaST1/YaST2 first execute /update/install/update.pre o after the initial installation, YaST1 / YaST2 extract /update/install/update.tar.gz in the root directory of the installed system and run /update/install/update.post afterwards. NOTES CREATING A DRIVER DISKETTE There are two methods to create the Installation Diskette: MAKING A DISKETTE UNDER MS-DOS: 1) Save the "cpq_cciss-2.4.52-11.ul10.amd64.dd.gz" file into a temporary directory. Use WINZIP to extract "cpq_cciss-2.4.52-11.ul10.amd64.dd" from this file into the same directory. Please ensure that "cpq_cciss-2.4.52-11.ul10.amd64.dd" is a DOS 8.3 name. 2) Use the "rawrite" utility which is included on the United Linux 1.0 CD in the "dosutil" directory. 3) Label a blank, formatted 3.5-inch diskette as "ProLiant United Linux 1.0 Driver Diskette". Next, insert the diskette in the diskette drive. Then, use the following commands (assuming your ProLiant Disk Image is at the location c: and your CD-ROM is drive d:) C:\> d:\dosutils\rawrite Enter disk image source file name: cpq_cciss-2.4.52-11.ul10.amd64.dd Enter target diskette drive: a: Please insert a formatted diskette into drive A: and press --ENTER-- : Enter MAKING A DISKETTE UNDER A LINUX-LIKE OS: 1) Save the "cpq_cciss-2.4.52-11.ul10.amd64.dd.gz" file into a temporary directory. Use GUNZIP to extract "cpq_cciss-2.4.52-11.ul10.amd64.dd" from this file into the same directory 2) To make a diskette under Linux (or any other Linux-like operating system), you must have permission to write to the device representing a 3.5-inch diskette drive (known as /dev/fd0 under Linux) 3) First, label a blank, formatted diskette appropriately (ProLiant United Linux 1.0 Driver Diskette). Insert the diskette into the floppy drive, but DO NOT issue the mount command: # dd if=cpq_cciss-2.4.52-11.ul10.amd64.dd of=/dev/fd0 bs=1440k 4) This command creates a diskette containing the image of the input file (if=cpq_cciss-2.4.52-11.ul10.amd64.dd) to an output file (of=/dev/fd0) using the diskette size of 1440k (1.44MB). To make another diskette label that diskette, and run "dd" again, specifying the correct input file. MD5SUM: 1b1a69345e2f4d2d467e296f1cb40b60 Feedback -------- To provide kernel/driver development feedback send email to iss_storagedev@hp.com Customer Service ---------------- For support for ProLiant Smart Array controllers, please send email to contact.hp@hp.com. Copyright 2002, 2003 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.