SOFTPAQ NUMBER: N/A PART NUMBER: N/A FILE NAME: cpq_cciss-2.4.48-3.rhel3.i386.dd.gz TITLE: Driver diskette image for ProLiant Linux driver for Smart Array 640x, 64x, 5i, 53xx Series controllers for Red Hat Enterprise Linux 3 VERSION: cpq_cciss-2.4.48-3 LANGUAGE: English CATEGORY: Storage Controllers DIVISION: N/A OPERATING SYSTEM: Red Hat Enterprise Linux 3 SYSTEM CONFIGURATION: All shipping configurations PREREQUISITES: N/A EFFECTIVE DATE: Dec 4,2003 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: N/A SUPERSEDES: N/A DESCRIPTION: This driver diskette image provides the binary driver module pre-built for Red Hat Enterprise Linux 3 to enable ProLiant Smart Array 640x, 64x, 5i, 53xx Series controllers. Using this driver diskette at Red Hat Enterprise Linux 3 installation time allows the most up-to-date driver version included in the diskette to be used, rather than the default driver version contained in the Red Hat Enterprise Linux 3 installation CD. FIXES ~~~~~ 1. Support for the devfs file system. 2. Support for detecting controller failure. (see notes in detect death patch) 3. Support for greater than 8 controllers in the system. General code cleanup for kernel.org submission. Enhancements to the shell scripts. 4. Ensures that if no pci devices are found, we unregister the driver. Otherwise, the next driver to call pci_register_driver() will oops. 5. Use pci_module_init() wrapper instead of pci_register_driver() for the above fix, and to ensure the correct return code for CONFIG_HOTPLUG and MODULE. 6. Use __devinit instead of __init. 7. Changes the author and version numbers to Hewlett-Packard and 2.4.48. 8. Fixes issue with sharing an irq with another controller. 9. Adopted naming convention outlined in the ISSG Versioning and Naming Standards v. 1.0 ENHANCEMENTS ~~~~~~~~~~~~ CREATING A DRIVER DISKETTE There are two methods to create the Installation Diskette: MAKING A DISKETTE UNDER MS-DOS: 1) Save the "cpq_cciss-2.4.48-3.rhel3.i386.dd.gz" file into a temporary directory. Use WINZIP to extract "cpq_cciss-2.4.48-3.rhel3.i386.dd" from this file into the same directory. Please ensure that "cpq_cciss-2.4.48-3.rhel3.i386.dd" is a DOS 8.3 name. 2) Use the "rawrite" utility which is included on the Red Hat Enterprise Linux 3 CD in the "dosutil" directory. 3) Label a blank, formatted 3.5-inch diskette as "ProLiant Red Hat Enterprise Linux 3 Driver Diskette". Next, insert the diskette in the diskette drive. Then, use the following commands (assuming your ProLiant Disk Image is at the location c: and your CD-ROM is drive d:) C:\> d:\dosutils\rawrite Enter disk image source file name: cpq_cciss-2.4.48-3.rhel3.i386.dd Enter target diskette drive: a: Please insert a formatted diskette into drive A: and press --ENTER-- : Enter MAKING A DISKETTE UNDER A LINUX-LIKE OS: 1) Save the "cpq_cciss-2.4.48-3.rhel3.i386.dd.gz" file into a temporary directory. Use GUNZIP to extract "cpq_cciss-2.4.48-3.rhel3.i386.dd" from this file into the same directory 2) To make a diskette under Linux (or any other Linux-like operating system), you must have permission to write to the device representing a 3.5-inch diskette drive (known as /dev/fd0 under Linux) 3) First, label a blank, formatted diskette appropriately (ProLiant Red Hat 7.2 Driver Diskette). Insert the diskette into the floppy drive, but DO NOT issue the mount command: # dd if=cpq_cciss-2.4.48-3.rhel3.i386.dd of=/dev/fd0 bs=1440k 4) This command creates a diskette containing the image of the input file (if=cpq_cciss-2.4.48-3.rhel3.i386.dd) to an output file (of=/dev/fd0) using the diskette size of 1440k (1.44MB). To make another diskette label that diskette, and run "dd" again, specifying the correct input file. NOTES Feedback -------- To provide kernel/driver development feedback send email to: iss_storagedev@hp.com . Customer Service ---------------- For support for ProLiant Smart Array Controllers, please send email to support@hp.com . INSTALLATION To install Linux using this "ProLiant Red Hat Enterprise Linux 3" Driver Diskette, boot your Linux machine with your Red Hat Enterprise Linux 3 CD1 in your CD-ROM Drive. A menu will be displayed, prompting for your input. Type the following line of code to inform the operating system of the diskette: # linux updates dd Red Hat Enterprise Linux 3 will prompt for the Updates Diskette and the ProLiant Red Hat Enterprise Linux 3 Driver Diskette during the installation procedure. SUPPORTED DEVICES AND FEATURES Smart Array 6400 Controller Smart Array 6400 EM Controller Smart Array 641 Controller Smart Array 642 Controller Modular Smart Array 500 Smart Array 5312 Controller Smart Array 5304 Controller Smart Array 5302 Controller Smart Array 532 Controller Smart Array 5i Plus Controller Smart Array 5i Controller SYSTEMS SUPPORTED family models Smart Array Controller 6400, 6402, 6404, 641, 642, 5i, 5312, 5304, 5300, 532, Cluster storage, MSA500 StorageWorks Enclosure All Models ProLiant Storage System All Models ProLiant BL20p G2 (2.8GHz+), (1.4GHz) ProLiant BL40p All Models ProLiant DL760 G2 (1.5GHz+), (700-900MHz) ProLiant DL740 (1.5GHz+) ProLiant DL580 G2 (1400MHz+), (700-900MHz) ProLiant DL560 (1.5GHz+) ProLiant DL380 G3 (2.4GHz+), G2 (1133-1400MHz), (667-1000MHz) ProLiant DL380 G3 (2.8GHz+), G2 (1266MHz) Packaged Cluster MSA 500 ProLiant DL360 G3 (2.4GHz+), G2 (1.4GHz), (550-1266MHz) ProLiant DL320 G2 (2.26GHz+), (800-1.53GHz) ProLiant ML750 All Models ProLiant ML570 G2 (1.4GHz+), (667-1000MHz) ProLiant ML530 G2 (2.4GHz+), (667-1000MHz) ProLiant ML370 G3 (2.4GHz+), G2 (1133-1400MHz), (667-1000MHz) ProLiant ML350 G3 (2.0GHz+), G2 (1133-1400MHz ),(667-1000MHz) ProLiant ML330e All Models ProLiant ML330 G3 (2.4GHz+), G2 (1000MHz), (667-999MHz) ProLiant ML310 All Models