----------------------------------------------------------------------------- H E W L E T T P A C K A R D C O M P A N Y hp ProLiant Support Pack (PSP) for Microsoft Windows NT 4.0 ----------------------------------------------------------------------------- 1. INTRODUCTION This file contains information regarding use of the HP ProLiant Support Pack for Microsoft Windows NT 4.0. The following information is provided: Support Pack Installation Component Usage Log File Usage 2. SUPPORT PACK INSTALLATION The primary method for installing the Support Pack is to run the SETUP.EXE program included with the Support Pack. By default, all software is selected for installation. In most circumstances, this default selection should not be altered, and installation is as simple as pressing the "Install" button. Even when selected, only software that is appropriate for the system it is being run on will actually be installed. Press the "Install" button to proceed with the installation. After installation of the appropriate software the utility will display any installation failures. For more information on the usage of SETUP.EXE, refer to the white paper or access the help system while running SETUP.EXE. A BP000198.CMD file is also provided with the Support Pack for use in installing the Support Pack from a command prompt without user interaction. As with the SETUP.EXE program, all software appropriate for the system it is being run on will be installed. The HP ProLiant Support Pack for Microsoft Windows NT 4.0 contains numerous files. All files must be present in the same directory as the SETUP.EXE program in order for the Support Pack to be installed properly. A console version of the setup application (SETUPC.EXE) is also provided as a way to script installations of the Support Pack or components. For more information on its usage, refer to the help available by running setupc.exe /?. 3. COMPONENT USAGE In addition to the SETUP.EXE program mentioned above, the Support Pack contains individual .EXE files corresponding to the various components that make up the Support Pack. If necessary, these components can be installed individually or their contents extracted to a floppy diskette for use during OS installation. To install an individual component just run the appropriate CPxxxxx.EXE file and chose the "Install" button. To extract the contents of a component to diskette run the appropriate CPxxxxx.EXE file, then chose the "Extract" button instead of the "Install" button. 3.1 COMPONENT CONFIGURATION Component files now offer optional support configuration before they are installed. The optional support configuration allows component-specific settings to be written into the .EXE file for availability during installation. Configuration is performed using the functionality provided by SETUP.EXE. When SETUP.EXE is launched, you will be able to all of the components that support or require configuration in the tree view of the main window. To configure a component, right-click on an item and select "Configure..." from the context-menu. For more information, consult the HP ProLiant Support Pack (PSP) and Deployment Utilities User Guide. NOTE: Component Configuration requires that the Smart Components must be in a write-accessible location. A CD or read-only network share is not supported. If you have obtained this Support Pack on the Smart Start CD, copy the entire contents of the Support Pack directory to the local hard drive or a network share and make sure the read-only attributes have been cleared from all of the files. cp002885.exe hp ProLiant System Management Driver for Windows NT 4.0 cp002886.exe hp ProLiant 32-Bit SCSI Controller Driver for Windows NT 4.0 cp002545.exe hp ProLiant 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver for Windows NT 4.0 cp002546.exe hp ProLiant Drive Array Driver for Windows NT 4.0 cp002547.exe hp ProLiant Smart Array-2 Controllers Driver for Windows NT 4.0 cp004032.exe HP ProLiant Smart Array 5x and 6x Controller Driver for Windows NT 4.0 cp002549.exe hp StorageWorks Fibre Channel Host Bus Adapter for Windows NT 4.0 cp002550.exe hp ProLiant CMD 0649 IDE Ultra DMA Controller Driver For Windows NT 4.0 cp002893.exe hp ProLiant Integrated Ultra ATA-100 Dual Channel Driver for Windows NT 4.0 cp002552.exe hp ProLiant Storage System Support for Windows NT 4.0 cp002909.exe hp ProLiant Integrated ATA RAID Management Utility for Windows cp002553.exe hp ProLiant Array Redundancy Software for Windows NT 4.0 cp002896.exe hp ProLiant Remote Monitor Service for Windows NT 4.0 cp002897.exe hp ProLiant Remote Insight Board Driver for Windows NT 4.0 cp002556.exe hp ProLiant Remote Insight Board Wide Area Network Driver for Windows NT 4.0 cp002557.exe hp ProLiant Integrated Lights-Out Management Interface Driver for Windows NT 4.0 cp002900.exe hp ProLiant Remote Insight Lights-Out II Board Driver for Windows NT cp002559.exe hp ProLiant ATI RAGE IIC Video Controller Driver for Windows NT 4.0 cp002560.exe hp ProLiant ATI RAGE XL Video Controller Driver for Windows NT 4.0 cp002561.exe hp ProLiant Integrated Management Display Utility for Windows NT 4.0 cp002562.exe hp ProLiant Integrated Management Log Viewer for Windows NT 4.0 cp002563.exe hp ProLiant Power Supply Viewer for Windows NT 4.0 cp002564.exe hp ProLiant PCI Hot Plug Utility for Windows NT 4.0 cp002565.exe hp ProLiant Power Down Manager for Windows NT 4.0 cp002566.exe hp ProLiant Enhanced Integrated Management Display Service for Windows NT 4.0 cp002597.exe hp ProLiant Array Configuration Utility for Windows cp002523.exe hp ProLiant NetFlex/Netelligent Adapter Driver for Windows NT 4.0 cp003135.exe hp ProLiant NCx1xx/NCx7xx Fast Ethernet and Gigabit Ethernet NIC Driver for Windows NT 4.0 cp003356.exe Version Control Agent for Windows cp003355.exe Foundation Agents for Windows cp002600.exe Server Agents for Windows cp002601.exe Storage Agents for Windows cp002978.exe NIC Agents for Windows cp003357.exe Survey Utility for Windows 4. LOG FILE USAGE Progress and results of the installation of all software included in the Support Pack is logged to the file %SystemDrive%\cpqsystem\log\cpqsetup.log. This file can be viewed with any text editor. Information for subsequent installations is appended to this log file, providing a chronological history of installation activity for all software installed by the Support Pack installation utilities. ---------------------------------------------------------------- Copyright 2000-2004 Compaq Information Technologies Group, L.P. Compaq and the Compaq logo Reg. U.S. Pat. & Tm. Off. All other product names mentioned herein may be trademarks and/or registered trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.