ProLiant Support Pack for Microsoft .NET 1. INTRODUCTION This file contains information regarding use of the ProLiant Support Pack for Microsoft .NET. The following information is provided: Support Pack Installation Component Usage Log File Usage 2. SUPPORT PACK INSTALLATION The primary method for installing the Support Pack is to run the SETUP.EXE program included with the Support Pack. By default, all software is selected for installation. In most circumstances, this default selection should not be altered, and installation is as simple as pressing the "Install" button. Even when selected, only software that is appropriate for the system it is being run on will actually be installed. Press the "Install" button to proceed with the installation. After installation of the appropriate software the utility will display any installation failures. For more information on the usage of SETUP.EXE, refer to the white paper or access the help system while running SETUP.EXE. A BP000110.CMD file is also provided with the Support Pack for use in installing the Support Pack from a command prompt without user interaction. As with the SETUP.EXE program, all software appropriate for the system it is being run on will be installed. The ProLiant Support Pack for Microsoft .NET contains numerous files. All files must be present in the same directory as the SETUP.EXE program in order for the Support Pack to be installed properly. A console version of the setup application (SETUPC.EXE) is also provided as a way to script installations of the Support Pack or components. For more information on its usage, refer to the help available by running setupc.exe /?. 3. COMPONENT USAGE In addition to the SETUP.EXE program mentioned above, the Support Pack contains individual .EXE files corresponding to the various components that make up the Support Pack. If necessary, these components can be installed individually or their contents extracted to a floppy diskette for use during OS installation. To install an individual component just run the appropriate CPxxxxx.EXE file and chose the "Install" button. To extract the contents of a component to diskette run the appropriate CPxxxxx.EXE file, then chose the "Extract" button instead of the "Install" button. 3.1 COMPONENT CONFIGURATION Component files now offer optional support configuration before they are installed. The optional support configuration allows component-specific settings to be written into the .EXE file for availability during installation. Configuration is performed using the functionality provided by SETUP.EXE. When SETUP.EXE is launched, you will be able to all of the components that support or require configuration in the tree view of the main window. To configure a component, right-click on an item and select "Configure..." from the context-menu. For more information, consult the ProLiant Support Pack (PSP) and Deployment Utilities User Guide. NOTE: Component Configuration requires that the Smart Components must be in a write-accessible location. A CD or read-only network share is not supported. If you have obtained this Support Pack on the Smart Start CD, copy the entire contents of the Support Pack directory to the local hard drive or a network share and make sure the read-only attributes have been cleared from all of the files. cp002367.exe Compaq iLO Advanced System Management Controller Driver for Windows 2000 cp002366.exe Compaq Advanced System Management Controller Driver for Windows 2000 cp002370.exe Compaq Integrated System Management Controller Driver for Windows 2000 cp002369.exe Compaq System Management Controller Driver for Windows 2000 cp002374.exe Compaq 32-Bit SCSI Controller Driver for Windows 2000 cp002375.exe Compaq 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver for Windows 2000 cp002353.exe Compaq Drive Array Driver for Windows 2000 cp002365.exe Compaq Smart Array-2 Controllers Driver for Windows .NET cp002363.exe Compaq Smart Array 5x Controller Driver For Windows 2000 cp002378.exe Compaq StorageWorks Fibre Channel Support for Windows 2000 cp002354.exe Compaq CMD 0649 IDE Ultra DMA Controller Driver For Windows 2000 cp002361.exe Compaq Integrated Ultra ATA-100 Dual Channel Driver For Windows 2000 cp002364.exe Compaq ProLiant Storage System Driver for Windows 2000 cp002377.exe Compaq Drive Array Notification for Windows 2000 cp002355.exe Compaq Remote Monitor Service for Windows 2000 cp002362.exe Compaq PCI Hot Plug Controller Driver for Windows 2000 cp002376.exe Compaq Remote Insight Board Driver for Windows 2000 cp002371.exe Compaq Integrated Lights-Out Management Interface Driver for Windows 2000 cp002372.exe Compaq Remote Insight Lights-Out II Board Driver for Windows 2000 cp002373.exe Compaq Rack Infrastructure Interface Service for Windows 2000 cp002356.exe Compaq Integrated Management Display Utility for Windows 2000 cp002368.exe Compaq Integrated Management Log Viewer for Windows 2000 cp002357.exe Compaq Power Supply Viewer for Windows 2000 cp002358.exe Compaq Power Down Manager for Windows 2000 cp002359.exe Compaq Enhanced Integrated Management Display Service for Windows 2000 cp002411.exe Compaq Array Configuration Utility XE for Windows cp002101.exe Compaq NetFlex/Netelligent Adapter Driver for Windows 2000 cp002529.exe Compaq NC31xx Ethernet or Fast Ethernet NIC Driver for Windows .NET cp002530.exe Compaq NC61xx/NC71xx Gigabit Ethernet NIC Driver for Windows .NET cp002531.exe Compaq NC67xx/NC77xx Gigabit Ethernet NIC Driver for Windows .NET cp002283.exe Compaq Network Teaming and Configuration for Windows .NET cp002433.exe Compaq Token Ring Protocol Driver for Windows .NET cp002434.exe Compaq Version Control Agent for Windows cp002298.exe Compaq Foundation Agents for Windows cp002299.exe Compaq Server Agents for Windows cp002300.exe Compaq Storage Agents for Windows cp002301.exe Compaq NIC Agents for Windows cp002295.exe Compaq Survey Utility for Windows 4. LOG FILE USAGE Progress and results of the installation of all software included in the Support Pack is logged to the file %SystemDrive%\cpqsystem\log\cpqsetup.log. This file can be viewed with any text editor. Information for subsequent installations is appended to this log file, providing a chronological history of installation activity for all software installed by the Support Pack installation utilities. ---------------------------------------------------------------- © 2002 Compaq Information Technologies Group, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.