C O M P A Q (R) C O M P U T E R C O R P O R A T I O N Compaq Support Paq for Microsoft Windows NT 4.0 1. INTRODUCTION This file contains information regarding use of the Compaq Support Paq for Microsoft Windows NT 4.0. The following information is provided: Support Paq Installation Component Usage Log File Usage 2. SUPPORT PAQ INSTALLATION The primary method for installing the Support Paq is to run the SETUP.EXE program included with the Support Paq. By default, all software is selected for installation. In most circumstances, this default selection should not be altered, and installation is as simple as pressing the "Install" button. Even when selected, only software that is appropriate for the system it is being run on will actually be installed. Press the "Install" button to proceed with the installation. After installation of the appropriate software the utility will display its results, including indication of software successfully installed, software not needed for the current system configuration and any installation failures. For more information on the usage of SETUP.EXE, refer to the help file (SETUP.HLP). A BP000099.CMD file is also provided with the Support Paq for use in installing the Support Paq from a command prompt without user interaction. As with the SETUP.EXE program, all software appropriate for the system it is being run on will be installed. The Compaq Support Paq for Microsoft Windows NT 4.0 contains numerous files. All files must be present in the same directory as the SETUP.EXE program in order for the Support Paq to be installed properly. A console version of the setup application (SETUPC.EXE) is also provided as a way to script installations of the Support Paq or components. For more information on its usage, refer to the help file (SETUPC.HLP). 3. COMPONENT USAGE In addition to the SETUP.EXE program mentioned above, the Support Paq contains individual .EXE files corresponding to the various components that make up the Support Paq. If necessary, these components can be installed individually or their contents extracted to a floppy diskette for use during OS installation. To install an individual component just run the appropriate CPxxxxx.EXE file and chose the "Install" button. To extract the contents of a component to diskette run the appropriate CPxxxxx.EXE file, then chose the "Extract" button instead of the "Install" button. 3.1 COMPONENT CONFIGURATION Component files now offer optional support configuration before they are installed. The optional support configuration allows component-specific settings to be written into the .EXE file for availability during installation. Configuration is performed using the CPCONFIG.EXE program included with the Support Paq. When the program is executed, it displays a list of all components in the current directory that support configuration. To configure a component, click on the component name. NOTE: To configure a package, the configuration tool and Support Paq must be in a write accessible location. A CD or read-only network share is not supported. To know when a component was last configured, execute the component and view the date and time below the component name and version. The following table specifies the Compaq software contained within and installed by each component. Components that have an asterisk (*) next to their filename support configuration by the CPCONFIG.EXE program described above: cp001426.exe Compaq System Management Driver for Windows NT 4.0 cp001427.exe Compaq Smart Array 5x Controller Driver for Windows NT 4.0 cp001428.exe Compaq Smart Array-2 Controllers Driver for Windows NT 4.0 cp001610.exe Compaq Drive Array Driver for Windows NT 4.0 cp001601.exe Compaq 32-Bit SCSI Controller Driver for Windows NT 4.0 cp001429.exe Compaq StorageWorks Fibre Channel Host Bus Adapter Driver for Windows NT 4.0 cp001602.exe Compaq CMD 0649 Ultra DMA IDE Controller Driver for Windows NT 4.0 cp001461.exe Compaq Integrated Ultra ATA-100 Dual Channel Driver for Windows NT 4.0 cp001628.exe Compaq 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver for Windows NT 4.0 cp001385.exe Compaq Proliant Storage System Support for Windows NT 4.0 cp001603.exe Compaq Remote Insight Board Driver for Windows NT 4.0 cp001228.exe Compaq Remote Insight Board Wide Area Network Driver for Windows NT 4.0 cp001456.exe Compaq Integrated Lights-Out Management Interface Driver for Windows NT 4.0 cp001604.exe Compaq Remote Monitor Service for Windows NT 4.0 cp001465.exe Compaq Integrated Management Display Utility for Windows NT 4.0 cp001466.exe Compaq Integrated Management Log Viewer for Windows NT 4.0 cp001467.exe Compaq Power Supply Viewer for Windows NT 4.0 cp001605.exe Compaq PCI Hot Plug Utility for Windows NT 4.0 cp001606.exe Compaq Array Redundancy Software for Windows NT 4.0 cp001468.exe Compaq Power Down Manager for Windows NT 4.0 cp001607.exe Compaq Enhanced Integrated Management Display Service for Windows NT 4.0 cp001608.exe Compaq ATI RAGE IIC Video Controller Driver for Windows NT 4.0 cp001609.exe Compaq ATI RAGE XL Video Controller Driver for Windows NT 4.0 cp001449.exe Compaq Array Configuration Utility for Windows NT 4.0 cp001460.exe Compaq Integrated ATA RAID Management Utility for Windows cp001672.exe Compaq NetFlex/Netelligent Adapter Driver for Windows NT 4.0 cp001450.exe Compaq Ethernet/Fast Ethernet or Gigabit NIC Driver for Windows NT 4.0 cp001451.exe Compaq NC67xx/NC77xx Gigabit Ethernet NIC Driver for Windows NT 4.0 cp001418.exe* Compaq Foundation Agents for Windows cp002012.exe Compaq Server Agents for Windows cp001420.exe Compaq Storage Agents for Windows cp001421.exe Compaq NIC Agents for Windows cp001392.exe* Compaq Survey Utility for Windows cp000736.exe Compaq Version Control Agent for Windows 4. LOG FILE USAGE Progress and results of the installation of all software included in the Support Paq is logged to the file %SystemDrive%\cpqsystem\log\cpqsetup.log. This file can be viewed with any text editor. Information for subsequent installations is appended to this log file, providing a chronological history of installation activity for all software installed by the Support Paq installation utilities. ---------------------------------------------------------------- Copyright 2002, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.