C O M P A Q (R) C O M P U T E R C O R P O R A T I O N Compaq Support Paq for Microsoft .NET 1. INTRODUCTION This file contains information regarding use of the Compaq Support Paq for Microsoft .NET. The following information is provided: Support Paq Installation Component Usage Log File Usage 2. SUPPORT PAQ INSTALLATION The primary method for installing the Support Paq is to run the SETUP.EXE program included with the Support Paq. By default, all software is selected for installation. In most circumstances, this default selection should not be altered, and installation is as simple as pressing the "Install" button. Even when selected, only software that is appropriate for the system it is being run on will actually be installed. Press the "Install" button to proceed with the installation. After installation of the appropriate software the utility will display its results, including indication of software successfully installed, software not needed for the current system configuration and any installation failures. For more information on the usage of SETUP.EXE, refer to the help file (SETUP.HLP). A BP000090.CMD file is also provided with the Support Paq for use in installing the Support Paq from a command prompt without user interaction. As with the SETUP.EXE program, all software appropriate for the system it is being run on will be installed. The Compaq Support Paq for Microsoft .NET contains numerous files. All files must be present in the same directory as the SETUP.EXE program in order for the Support Paq to be installed properly. A console version of the setup application (SETUPC.EXE) is also provided as a way to script installations of the Support Paq or components. For more information on its usage, refer to the help file (SETUPC.HLP). 3. COMPONENT USAGE In addition to the SETUP.EXE program mentioned above, the Support Paq contains individual .EXE files corresponding to the various components that make up the Support Paq. If necessary, these components can be installed individually or their contents extracted to a floppy diskette for use during OS installation. To install an individual component just run the appropriate CPxxxxx.EXE file and chose the "Install" button. To extract the contents of a component to diskette run the appropriate CPxxxxx.EXE file, then chose the "Extract" button instead of the "Install" button. 3.1 COMPONENT CONFIGURATION Component files now offer optional support configuration before they are installed. The optional support configuration allows component-specific settings to be written into the .EXE file for availability during installation. Configuration is performed using the CPCONFIG.EXE program included with the Support Paq. When the program is executed, it displays a list of all components in the current directory that support configuration. To configure a component, click on the component name. NOTE: To configure a package, the configuration tool and Support Paq must be in a write accessible location. A CD or read-only network share is not supported. To know when a component was last configured, execute the component and view the date and time below the component name and version. The following table specifies the Compaq software contained within and installed by each component. Components that have an asterisk (*) next to their filename support configuration by the CPCONFIG.EXE program described above: cp002077.exe Compaq iLO Advanced System Management Controller Driver for Windows 2000 cp002078.exe Compaq Advanced System Management Controller Driver for Windows 2000 cp002061.exe Compaq Integrated System Management Controller Driver for Windows 2000 cp002062.exe Compaq System Management Controller Driver for Windows 2000 cp002070.exe Compaq 32-Bit SCSI Controller Driver for Windows 2000 cp002095.exe Compaq 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver for Windows 2000 cp002063.exe Compaq Drive Array Driver for Windows 2000 cp002097.exe Compaq Smart Array-2 Controllers Driver for Windows .NET cp002076.exe Compaq Smart Array 5x Controller Driver For Windows 2000 cp002081.exe Compaq StorageWorks Fibre Channel Support for Windows 2000 cp002064.exe Compaq CMD 0649 IDE Ultra DMA Controller Driver For Windows 2000 cp002074.exe Compaq Integrated Ultra ATA-100 Dual Channel Driver For Windows 2000 cp002082.exe Compaq ProLiant Storage System Driver for Windows 2000 cp002080.exe Compaq Drive Array Notification for Windows 2000 cp002073.exe Compaq Integrated ATA RAID Management Utility for Windows cp002065.exe Compaq Remote Monitor Service for Windows 2000 cp002075.exe Compaq PCI Hot Plug Controller Driver for Windows 2000 cp002098.exe Compaq Remote Insight Board Driver for Windows 2000 cp002079.exe Compaq Integrated Lights-Out Management Interface Driver for Windows 2000 cp002071.exe Compaq Remote Insight Lights-Out II Board Driver for Windows 2000 cp002072.exe Compaq Rack Infrastructure Interface Service for Windows 2000 cp002066.exe Compaq Integrated Management Display Utility for Windows 2000 cp002096.exe Compaq Integrated Management Log Viewer for Windows 2000 cp002067.exe Compaq Power Supply Viewer for Windows 2000 cp002068.exe Compaq Power Down Manager for Windows 2000 cp002069.exe Compaq Enhanced Integrated Management Display Service for Windows 2000 cp002099.exe Compaq Array Configuration Utility for Windows 2000 cp002101.exe Compaq NetFlex/Netelligent Adapter Driver for Windows 2000 cp002102.exe Compaq NC31xx Ethernet or Fast Ethernet NIC Driver for Windows .NET cp002103.exe Compaq NC61xx/NC71xx Gigabit Ethernet NIC Driver for Windows .NET cp002104.exe Compaq NC67xx/NC77xx Gigabit Ethernet NIC Driver for Windows .NET cp002105.exe Compaq Network Teaming and Configuration for Windows .NET cp001658.exe Compaq Foundation Agents for Windows cp001659.exe Compaq Server Agents for Windows cp001660.exe Compaq Storage Agents for Windows cp001661.exe Compaq NIC Agents for Windows cp001656.exe Compaq Survey Utility for Windows 4. LOG FILE USAGE Progress and results of the installation of all software included in the Support Paq is logged to the file %SystemDrive%\cpqsystem\log\cpqsetup.log. This file can be viewed with any text editor. Information for subsequent installations is appended to this log file, providing a chronological history of installation activity for all software installed by the Support Paq installation utilities. ---------------------------------------------------------------- Copyright 2002, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.