C O M P A Q (R) C O M P U T E R C O R P O R A T I O N Compaq Support Paq for Novell NetWare 5.x 1. INTRODUCTION This file contains information regarding use of the Compaq Support Paq for Novell NetWare 5.x. The following information is provided: Support Paq Installation Component Usage Log File Usage 2. SUPPORT PAQ INSTALLATION The primary method for installing the Support Paq is to run the CPQDPLOY.NLM program included with the Support Paq. By default, all software is selected for installation. In most circumstances, this default selection should not be altered. Even when selected, only software that is appropriate for the system it is being run on will actually be installed. After installation of the appropriate software the utility will display its results, including indication of software successfully installed, software not needed for the current system configuration and any installation failures. The Compaq Support Paq for Novell NetWare 5.x contains numerous files. All files must be present in the same directory as the CPQDPLOY.NLM program or in order for the Support Paq to be installed properly. 3. COMPONENT USAGE In addition to the CPQDPLOY.NLM program mentioned above, the Support Paq contains individual .NLM files corresponding to the various components that make up the Support Paq. The following table specifies the Compaq software contained within and installed by each component: cp001191.nlm Compaq Drive Array Driver cp001203.nlm Compaq 32-Bit SCSI Controller cp001190.nlm Compaq 64-Bit/66-Mhz Wide Ultra3 Controller Driver cp001193.nlm Compaq StorageWorks Fibre Channel Host Bus Adapter Driver cp001192.nlm Compaq Integrated Management Display Utility cp001196.nlm Compaq NetFlex/Netelligent Adapter Driver cp001205.nlm Compaq Netelligent Token-Ring NIC Component cp001206.nlm IBM ISA Token-Ring NIC Component cp001207.nlm Compaq Ethernet or Fast Ethernet NIC Driver cp001208.nlm Compaq Gigabit Ethernet NIC Driver cp001210.nlm Compaq 100 FDDI NIC Component cp001209.nlm AMD PC-NET / Compaq 10T ISA NIC Component cp001200.nlm Compaq Remote Insight Board/PCI Component cp001204.nlm Compaq Symmetric Multiprocessing (SMP) Support Component For NetWare 5.x cp001194.nlm Compaq Server Health Utility Component cp001197.nlm Compaq Online Array Configuration Utility Component cp001195.nlm Compaq Integrated Management Log Viewer Component cp001211.nlm AMI IDE/ATA/ATAPI UDMA Host Adapter Module cp001202.nlm Compaq PCI Hot Plug Component cp001198.nlm Compaq Power Subsystem Utility Component cp001201.nlm Compaq Standby Server Recovery Option Component cp001199.nlm Compaq Unified Raid Host Adapter Module Component cp000983.nlm Compaq Host Agent Component cp000984.nlm Compaq Server Agent Component cp000985.nlm Compaq NIC Agent Component cp000986.nlm Compaq Storage Agent Component cp001131.nlm Compaq Survey Utility 4. LOG FILE USAGE Progress and results of the installation of all software included in the Support Paq is logged to the file SYS:\ETC\CPQLOG.LOG. This file can be viewed with any text editor. Information for subsequent installations is appended to this log file, providing a chronological history of installation activity for all software installed by the Support Paq installation utilities. ---------------------------------------------------------------- Copyright 2001, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.