C O M P A Q (R)  C O M P U T E R  C O R P O R A T I O N

                         Compaq Support Paq for
                         Novell NetWare 4.x
                 

1.  INTRODUCTION

This file contains information regarding use of the Compaq Support Paq for
Novell NetWare 4.x.  The following information is provided:

    Support Paq Installation
    Component Usage
    Log File Usage


2.  SUPPORT PAQ INSTALLATION

The primary method for installing the Support Paq is to run the CPQDPLOY.NLM
program included with the Support Paq.  By default, all software is selected for
installation.  In most circumstances, this default selection should not be
altered.  Even when selected, only software that is appropriate for the system 
it is being run on will actually be installed.  After installation of the 
appropriate software the utility will display its results, including indication 
of software successfully installed, software not needed for the current system 
configuration and any installation failures.

The Compaq Support Paq for Novell NetWare 4.x contains numerous files.  All
files must be present in the same directory as the CPQDPLOY.NLM program or in order
for the Support Paq to be installed properly.


3.  COMPONENT USAGE

In addition to the CPQDPLOY.NLM program mentioned above, the Support Paq contains
individual .NLM files corresponding to the various components that make
up the Support Paq.  

The following table specifies the Compaq software contained within and installed
by each component:

cp001254.nlm     Compaq Drive Array Driver
cp001255.nlm     Compaq 32-Bit SCSI Controller
cp001256.nlm     Compaq 64-Bit/66-Mhz Wide Ultra3 Controller Driver
cp001257.nlm     Compaq StorageWorks Fibre Channel Host Bus Adapter Driver
cp001258.nlm     Compaq Integrated Management Display Utility
cp001259.nlm     AMI IDE/ATA/ATAPI UDMA Host Adapter Module
cp001260.nlm     Compaq NetFlex/Netelligent Adapter Driver
cp001261.nlm     Compaq Netelligent Token-Ring NIC Component
cp001262.nlm     IBM ISA Token-Ring NIC Component
cp001263.nlm     Compaq Ethernet or Fast Ethernet NIC Driver
cp001264.nlm     Compaq Gigabit Ethernet NIC Driver
cp001265.nlm     Compaq 100 FDDI NIC Component
cp001266.nlm     AMD PC-NET / Compaq 10T ISA NIC Component
cp001267.nlm     Compaq Remote Insight Board/PCI Component
cp001268.nlm     Compaq Symmetric Multiprocessing (SMP) Support Component For NetWare 4.x
cp001269.nlm     Compaq Server Health Utility Component
cp001270.nlm     Compaq Online Array Configuration Utility Component
cp001271.nlm     Compaq Integrated Management Log Viewer Component
cp001272.nlm     Compaq PCI Hot Plug Component
cp001273.nlm     Compaq Power Subsystem Utility Component
cp001274.nlm     Compaq Standby Server Recovery Option Component
cp001275.nlm     Compaq Unified Raid Host Adapter Module Component
cp001276.nlm     Compaq Remote Insight Board Display Driver
cp001186.nlm     Compaq Host Agent Component
cp001187.nlm     Compaq Server Agent Component
cp001188.nlm     Compaq NIC Agent Component
cp001189.nlm     Compaq Storage Agent Component
cp001253.nlm     Compaq Survey Utility

4.  LOG FILE USAGE

Progress and results of the installation of all software included in the Support
Paq is logged to the file SYS:\ETC\CPQLOG.LOG.  This file can be viewed with any 
text editor.  Information for subsequent installations is appended to this log 
file, providing a chronological history of installation activity for all software 
installed by the Support Paq installation utilities.

----------------------------------------------------------------
Copyright 2001, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.