C O M P A Q (R)  C O M P U T E R  C O R P O R A T I O N

                         Compaq Support Paq for
                         Microsoft Windows 2000
                 

1.  INTRODUCTION

This file contains information regarding use of the Compaq Support Paq for
Microsoft Windows 2000.  The following information is provided:

    Support Paq Installation
    Component Usage
    Log File Usage

2.  SUPPORT PAQ INSTALLATION

The primary method for installing the Support Paq is to run the SETUP.EXE
program included with the Support Paq.  By default, all software is selected for
installation.  In most circumstances, this default selection should not be
altered, and installation is as simple as pressing the "Install>" button.  Even
when selected, only software that is appropriate for the system it is being run
on will actually be installed.  Press the "Install>" button to proceed with the
installation.  After installation of the appropriate software the utility will
display its results, including indication of software successfully installed,
software not needed for the current system configuration and any installation
failures.

A BPxxxxxx.CMD file is also provided with the Support Paq for use in installing
the Support Paq from a command prompt without user interaction.  As with the
SETUP.EXE program, all software appropriate for the system it is being run on
will be installed.

The Compaq Support Paq for Microsoft Windows 2000 contains numerous files.  All
files must be present in the same directory as the SETUP.EXE program or in order
for the Support Paq to be installed properly.

3.  COMPONENT PACKAGE USAGE

In addition to the SETUP.EXE program mentioned above, the Support Paq contains
individual .EXE files corresponding to the various software packages that make
up the Support Paq.  If necessary, these software packages can be installed
individually or their contents extracted to a floppy diskette for use during OS
installation.

To install an individual component package just run the appropriate CPxxxxx.EXE
file and chose the "Install" button.

To extract the contents of a component package to diskette run the appropriate
CPxxxxx.EXE file, then chose the "Extract" button instead of the "Install"
button.

The following table specifies the Compaq software contained within and installed
by each component package:

CP000861.EXE          Compaq Advanced System Management Driver for Windows 2000
CP000862.EXE          Compaq System Management Controller Driver for Windows 2000
CP000863.EXE          Compaq Integrated System Management Controller Driver for Windows 2000
CP000864.EXE          Compaq Drive Array Driver for Windows 2000
CP000865.EXE          Compaq Smart Array-2 Controllers Driver for Windows 2000
CP000866.EXE          Compaq 32-Bit SCSI Controller Driver for Windows 2000
CP000868.EXE          Compaq 64-Bit/66-Mhz Wide Ultra3 SCSI Controller Driver for Windows 2000
CP000867.EXE	      Compaq Smart Array 5x Adapter Support for Windows 2000
CP000869.EXE	      Compaq StorageWorks Fibre Channel Host Bus Adapter Drive for Windows 2000
CP000870.EXE	      Compaq CMD 0649 Ultra DMA IDE Controller Driver for Windows 2000
CP000871.EXE	      Compaq Integrated Ultra ATA-100 Dual Channel Driver for Windows 2000
CP000872.EXE          Compaq ProLiant Storage System Support for Windows 2000
CP000873.EXE          Compaq Drive Array Notification for Windows 2000
CP000874.EXE          Compaq Remote Monitor Service for Windows 2000
CP000875.EXE          Compaq PCI Hot Plug Controller Driver for Windows 2000
CP000876.EXE          Compaq Integrated Management Dispay Utility for Windows 2000
CP000877.EXE          Compaq Integrated Management Log Viewer for Windows 2000
CP000878.EXE          Compaq Power Supply Viewer for Windows 2000
CP000879.EXE          Compaq Power Down Manager for Windows 2000
CP000880.EXE          Compaq Enhanced Integrated Management Display Service for Windows 2000
CP000881.EXE          Compaq Array Configuration Utility for Windows 2000
CP000882.EXE          Compaq ATI RAGE IIC Video Controller Support for Windows 2000
CP000883.EXE	      Compaq Remote Insight Board Driver for Windows 2000
CP000884.EXE          Compaq Array Redundancy Software for Windows 2000
CP000885.EXE          Compaq NetFlex/Netelligent Adapter Driver for Windows 2000
CP000886.EXE          Compaq Ethernet or Fast Ethernet NIC NT Driver for Windows 2000
CP000887.EXE          Compaq Gigabit Ethernet NIC NT Driver for Windows 2000
CP000888.EXE	      Compaq Network Teaming and Configuration for Windows 2000
CP000889.EXE	      Compaq Foundation Agents
CP000890.EXE	      Compaq Server Agents
CP000891.EXE	      Compaq Storage Agents
CP000892.EXE	      Compaq NIC Agents
CP000893.EXE	      Compaq Survey Utility

4.  LOG FILE USAGE

Progress and results of the installation of all software included in the Support
Paq is logged to the file %SystemDrive%\cpqsystem\log\cpqsetup.log.  This file can be
viewed with any text editor.  Information for subsequent installations is
appended to this log file, providing a chronological history of installation
activity for all software installed by the Support Paq installation utilities.

----------------------------------------------------------------
Copyright 2001, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.