TITLE: ProLiant MIB update kit for HP Systems Insight Manager for Windows, Linux, and HP-UX VERSION: 7.50 FILENAME: upd750mib.zip (Windows); upd750mib.tar (Linux, HP-UX) NOTE: The MIBS contained in this Mib Update Kit are already integrated in the HP Systems Insight Manager 5.1 release. If this Mib Update Kit is applied to HP Systems Insight Manager 5.1, no warning will be done. _____________________________________ ENHANCEMENTS The following MIBs were changed in this release: - BLADETYPE2-ACL.mib New mib added to support GbE2 3.0 Added oid aclCurCfgTCOFlagsMask and aclNewCfgTCPFlagsMask Modified aclCurCfgEthFmt and aclNewCfgEthFmt - BLADETYPE2-NETWORK.MIB Large number of changes. To numerous to highlight - BLADETYPE2-PHYSICAL.MIB Large number of changes. To numerous to highlight Removed oid mstCisCurCfgBridgeHelloTime and mstCistNewCfgBridgeHelloTime - BLADETYPE2-QOS.MIB New Mib added to Mgmt CD - BLADETYPE2-SWITCH.MIB Large number of changes. To numerous to highlight here Removed agCurCfgMgmtNetwork, agNewCfgMgmtNetwork, agCurCfgMgmtMasm, agNewCfgMgmtMask, tacCurCfgCmdAuthor, and tacNewCfgCmdAuthor. - BLADETYPE2-TRAP.MIB Large number of changes. To numerous to highlight here - cisco-stack-mib.mib New mib added to the Mgmt Cd - cisco-port-security-mib.mib New mib added to the Mgmt Cd - CPQFCA.MIB Add new HBAs fca-1143(19) and fca-1243(20) to cpqFcaHostCntlrModel. Add new HBAs fca-1143(19) and fca-1243(20)fca-2143br(21) and fca-2243br(22) to cpqFcaHostCntlrModel. Enabled VARBINDSEVERITY so HPSIM will honor cpqHoTrapFlags - CPQHLTH.MIB cpqHeACPowerInputTable - added cpqHeFltTolPowerSupplyRedundantPartner - added Added new traps, cpqHeManagementProcInReset, cpqHeManagementProcReady, and cpqHeManagementProcFailedReset - CPQHOST.MIB OID cpqHoCrashDumpState - added OID cpqHoCrashDumpCondition - added OID cpqHoBootPagingFileSize - added OID cpqHoBootPagingFileMinimumSize - added TRAP cpqHoCrashDumpNotEnabledTrap - added TRAP cpqHoBootPagingFileTooSmallTrap - added Fixed a spelling error Added "solaris" enumeration for cpqHoOsType - CPQIDA.MIB Changes for HP Smart Array P400, P400i, E200, E200i. Deprecated cpqDaLogDrvRebuildBlks and cpqDaSpareRebuildBlks. Added batteryHotRemoved to cpqDaAccelErrCode. Added cpqDaCntlrNumberOfInternalPorts and cpqDaCntlrNumberOfExternalPorts to controller table. Enabled VARBINDSEVERITY so HPSIM will honor cpqHoTrapFlags - CPQIDE.MIB Enabled VARBINDSEVERITY so HPSIM will honor cpqHoTrapFlags - CPQNIC.MIB Added new OID named cpqNicIfPhysAdapterSpeedMb Added new OID named cpqNicIfLogMapSpeedMb Added new OID named cpqNicIfPhysAdapterInOctets and cpqNicIfPhysAdapterOutOctets - cpqpower.mib New mib cpqpower.mib added to the Mgmt CD Fixed a Trap id which was a duplicate - CPQSCSI.MIB Added cpqSasLogDrvRebuildingPercent. Enabled VARBINDSEVERITY so HPSIM will honor cpqHoTrapFlags - cpqservice.mib Added mib to the Mgmt CD. Added trap cpqService3Information and objects cpqServiceEventSeverity cpqServiceAnalyzerSystemName, cqpServiceFRUList1, cpqServiceFRUList2, cpqServiceFRUList3, cpqServiceFRUList4, cpqServiveLocatoin1, and cpqServiceLocation2. - CPQSINFO.MIB cpqSiAssetTagMaxLength OID - added cpqSiFirmwareLocation OID - added cpqSiFirmwareStatus OID - added cpqSiFirmwareRevCellTablePtr - status changed to deprecated - cpqsm2.mib Added an ENUM pciIntegratedLightsOutRemoteInsight2(7) to cpqSm2CntlrModel - CPQSTDEQ.MIB cpqSeCPUCoreThreadIndex OID - added cpqSeCPUChipGenerationName OID - added cpqSeCPUMultiThreadStatus OID - added cpqSeCPUCoreMaxThreads OID - added cpqSePciIsSlot0Embedded OID - added cpqSeMPFwVer OID - added cpqSeBMCFwVer OID - added cpqSeSelectedSysFw OID - added cpqSeCellCLMCondition OID - added cpqSeTotalMemMB OID - added cpqSePciDeviceMaxSpeed OID - added cpqSeComplexCellSlotTotalMemory OID - added cpqSeComplexFreeCellCpuTable TABLE - added cpqSeComplexFreeCellDIMMTable TABLE - added cpqSeCpuSocketNumber OID - description updated cpqSeCpuUnitIndex OID - description updated cpqSePartitionTotalCPU - description updated cpqSeCellToScanBusConnectionStatus - description changed Added cpqSeCpuLowPowerStatus and cpqSeCpuPrimary OIDs Added cpqSeCpuStatusChange and cpqSeCpuPowerPodstatusChange traps - CPQSTSYS.MIB Enabled VARBINDSEVERITY so HPSIM will honor cpqHoTrapFlags - cpqwinos.mib Changed SEVERITY for a number of traps from CRITICAL to MAJOR cpqOsCpuTimeDegraded, cpqOsCacheCopyReadHitsDegraded cpqOsPageFileUsageDegraded, cpqOsLogicalDiskBusyTimeDegraded cpqOsMemAvailableKBytes description updated - fddi-smt73-mib.mib (rfc1512.mib) New mib added to the Mgmt CD renamed to be a derivative of the ModuleName _____________________________________ INSTALL INFORMATION This document will guide the user through getting the latest mib and cfg files copied and installed on their management server. Two procedures exist: one to install the MIB update on Windows platforms and the other to install the MIB update on HP-UX or Linux platforms. The Windows update will automatically determine if HP Systems Insight Manager is running and then perform the appropriate steps else an error will be summed. The procedure for HP-UX and Linux is the same for both Operating Systems and only runs if Systems Insight Manager (any version) is installed. NOTE: The user must log in with administrator privileges on Windows and as root on HP-UX/Linux. In addition, when updating the MIBs for Systems Insight Manager, the log in account must also be a full-rights Systems Insight Manager user in order to execute tools such as MxMib. NOTE: After a successful installation of the mibs for a platform running Insight Manager 7 or Insight Manager XE, the service must be stopped and restarted. This is not necessary for Systems Insight Manager. NOTE: This kit contains modifications to event types which if used in a query could cause the query to not trigger as the query mechanism uses a perfect match scheme. _____________________________________ INSTALL PROCEDURE(s) To Update MIBs on a Windows Platform: 1) Log in to Windows as a user with administrative rights 2) Create a temp directory, such as c:\mgmtcd 3) Launch your browser with this URL: http://www.hp.com/go/hpsim and navigate to the mibs download (if you do not aleady have the MIB kit). Select Download->HP SIM - Windows->Insight Management MIB update kit for HP SIM. 4) Download and save the zip file, upd750mib.zip, to the newly created directory, c:\mgmtcd 5) Open My Computer and navigate to c:\mgmtcd. 6) Using a Win-zip compatible program, unzip the contents of the zip file by double clicking on it and then extract the contents to c:\mgmtcd. 7) Start a command console by clicking on Start->Run and entering cmd in the dialog box that appears and then click OK. 8) In the Command Console, navigate to c:\mgmtcd ( cd c:\mgmtcd ) 7) In c:\mgmtcd, execute the following command exactly: cscript updatemibs.js 8) The script will run and display messages on the command console. 9) When the script completes, you may delete the temp directory c:\mgmtcd and all its contents To Update MIBs on an HP-UX/Linux Platform: 1) Log in to HP-UX/Linux as root 2) Create a directory such as /root/mgmtcd (mkdir mgmtcd), It does not have to exist off of the root but for the purposes of this example it does. 3) Launch your browser with this URL: http://www.hp.com/go/hpsim and navigate to the mibs download. Select Download->HP SIM - (HP-UX or Linux)->Proliant MIB update kit for HP SIM. 4) Download and save the tar file, upd750mib.tar to the newly created directory, /root/mgmtcd 5) Start a terminal and navigate to the new directory ( cd /root/mgmtcd ) 6) Extract the contents of upd750mib.tar by entering the following command: tar -xvf upd750mib.tar 7) Execute the following: chmod +x updatemibs 8) Execute the following: ./updatemibs 9) The script will run and display messages on the terminal. 10) When the script completes, you may remove the directory /root/mgmtcd and all its contents Copyright 2004, 2005, 2006, Hewlett-Packard Development Company, L.P. All rights reserved.