FILE NAME:  ml150sconic-7.5.18-1.zip
TITLE (Marketing Name of the software):  HP ProLiant ML150 G2 Embedded Gigabit Ethernet 
SCO OpenServer 5 Driver
CATEGORY:  Driver - Network
VERSION:  7.5.18
SUPPORTED LANGUAGE(S):  English
SUPPORTED HARDWARE:  ProLiant ML150 G2 Server
SUPPORTED OPERATING SYSTEM:  SCO OpenServer 5
EXPECTED RELEASE DATE:  November 1, 2004
DESCRIPTION:  This .ZIP file contains driver and support software for ProLiant ML150 G2 
Server running SCO OpenServer 5.
PUBLIC NOTES:
FIXES OR ENHANCEMENTS:  
INSTALLATION INSTRUCTIONS:
Creating Floppy
1. Copy the file VOL.000.000 to an SCO system.
2. Create the floppy using dd if=VOL.000.000 of=/dev/rfd0135ds18.
Installing Driver
1. Use custom or scoadmin software to install the driver from the media image or from 
the floppy created above.
2. After the package is installed, use netconfig to add the new network adapter and 
configure network protocol and address.
3. Once the adapter is added, modify the hardware configuration in Advanced Options to 
change line speed and flow control if desired. The different settings of these 
parameters are listed below:
* LineSpeed: AutoNegotiate (default) (all speeds advertised)
* FixedHalfDduplex10
* AutoHalfDduplex10 (only 10 Mbps half duplex advertised)
* FixedFullDduplex10
* AutoFullDduplex10 (only 10 Mbps full duplex advertised)
* FixedHalfDduplex100
* AutoHalfDduplex100 (only 100 Mbps half duplex advertised)
* FixedFullDduplex100
* AutoFullDduplex100 (only 100 Mbps full duplex advertised)
* AutoHalfDduplex1000 (only 1 Gbps half duplex advertised)
* FixedFullDduplex1000*
* AutoFullDduplex1000 (only 1 Gbps full duplex advertised)
* FlowControl: AutoNegotiate** (Symmetric Pause advertised) (default)
* Off
* RxPause
* TxPause
* RxPause/TxPause
*Note that 1000 Mbps (1 Gbps) full duplex fixed speed is only valid for fibre connections. 
For copper twisted pair connections, 1 Gbps can only be set through auto negotiation with 
a 1 Gbps link partner.
**Note that auto negotiation of flow control is only valid when the line speed is set to 
auto negotiation (all speeds advertised or single speed advertised).
A kernel rebuild and reboot is required before the new configuration will take effect.
PREREQUISITES:
Copyright 2004, Hewlett-Packard Company.  All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks of their 
respective companies.